Technical Information - JVC LT-42DP8BJ Instructions Manual

Technical Information

"T-V LINK" allows the TV to share information easily with a connected "T-V LINK" compatible device.
By using T-V LINK:
You can send the channel information programmed on the TV to the "T-V LINK" compatible device, so that both
the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details,
refer to the external device's manual.
You can easily record the TV programme you are viewing on a "T-V LINK" compatible device by using the
"Direct Rec" feature. For more details, refer to the external device's manual.
What is "ACI" (Automatic Channel Installation)?
Some cable companies transmit a signal called "ACI" which contains information that allows TV channels to be
registered automatically on your TV.
When an ACI signal is received, "ACI Start / ACI Skip" appears in the "Auto Program" screen.
Attach a new plug following the steps below. If in doubt, contact your local retailer.
Important
Never connect to the larger terminal marked with an "E", the safety earth symbol "
green-and-yellow.
The wires in the mains lead on this product are coloured with the following code:
• Blue: Neutral wire (connect to the black terminal, or one marked "N")
• Brown: Live wire (connect to the red terminal, or one marked "L")
Open the plug as illustrated on the right.
When replacing the fuse, always use a correctly rated and approved type and
re-fit the fuse cover when finished.
If in doubt, contact your local retailer.
If the signal doesn't appear, check that the
vertical frequency on the PC is set to "60Hz".
Connect a DVI device to EXT-5 (HDMI) using DVI-HDMI conversion cable. Connect analogue sound output of the
DVI device to L and R terminals in EXT-4.
Set "Audio" in "HDMI Setting" to "Analogue" or "Auto"
EXT-6 input does not support analogue sound (EXT-4).
For more information, please read the separate manual (WATCHING DIGITAL
CHANNELS).
"Technical Information" (P. 21 - 22)
What is "T-V LINK"?
If you accidentally cut the power cord
Change the fuse in the plug
PC signals that can be displayed
Resolution
Vertical frequency (Hz)
Connect DVI devices
640 x 480 (VGA) 1024 x 768 (XGA)
(P. 38)
g
" or coloured green or
Fuse
60.0 60.0
42