Troubleshooting - JVC LT-42DP8BJ Instructions Manual

Troubleshooting

Problem
Wrong screen size
No picture, no sound
No sound
Green and distorted
screen
Some functions do not
work
Some inputs cannot be
selected in the sub-
picture
"Feature Not Available"
appears
"ACI Error" appears
"No Recording"
"No Recording
Possible"
"No Recording Media
Problem"
"No Recording Device
Busy"
41
Switch "Size" in "HDMI Setting" to "1" or "2". (480p (525p) only)
Read the user manual of the connected device and perform the
following:
Check if the output setting of the device is correct.
g
Change the signal format of the device to other format.
g
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI
devices, or "Analogue" or "Auto" for DVI devices.
(Not available for EXT-6)
Wait a little for the signal to stabilize when switching the signal
format for an HDMI device.
It is not a malfunction. Depending on the situation, some
function items will be displayed in gray colour and will not work.
"EXT-4", "EXT-5", "EXT-6" inputs and PC mode cannot be
selected in the sub-picture.
RGB input signal of "EXT-1" and "EXT-2" are not available in
dual-picture mode.
Is the "T-V LINK" compatible device connected to EXT-2?
Is the SCART CABLE "Fully Wired"?
Is the "T-V LINK" compatible device turned on?
After confirming all the conditions above, press "OK" button
again.
Press to start "ACI" again.
If you still receive the "ACI Error" after numerous tries, press
to cancel "ACI".
A problem occurs at the recorder.
The displayed video cannot be recorded.
The recorder is not ready for recording.
Check the videotape or DVD disc.
The recorder is recording another programme, or is playing.
Actions
Page
38
–
–
–
38
–
31
–
–
–
–
–
–
–