Related Manuals for Hyundai A25024L
Summary of Contents for Hyundai A25024L
- Page 1 User Manual Product Name: 5inch LTE Smartphone Brand: HYUNDAI,VULCAN Model: A25024L, VR5014, T36 Manufacture: Sintave...
-
Page 2: Table Of Contents
Safety & Notice ..................3 Getting Started ..................4 Turning the Phone On and Off ................4 Battery charging ....................4 Function Menu ..................4 Contact .......................4 Messaging ......................4 Phone features....................5 Calling ......................5 3.3.1 Using the 5inch LTE Smartphone memory card as U disk........6 WLAN .........................6 3.5.1 Open the WLAN and connect to a wireless network ........ -
Page 3: Safety & Notice
1 Safety & Notice WARNING: Please pay attention to these guidelines, it’s dangerous and may break the law, even the manufacturer will not undertake any responsibility to the user who does not follow with the following recommendations or improper to use the Smart Phone. ... -
Page 4: Getting Started
2 Getting Started Turning the Phone On and Off To turn on or off the phone please hold down the Power key. If you turn on the phone without having inserted the SIM card, phone will display “No SIM card”. After inserting the SIM card, the phone will automatically check if the SIM is useable. -
Page 5: Phone Features
Phone features 3.3.1 Calling Enter the phone number, including the area code, select one of the SIM card and start to make a call. During in a call, it will display the call status information, if you need to input the number, please directly press the number key. -
Page 6: Using The 5Inch Lte Smartphone Memory Card As U Disk
Resume the call. Speaker Activate or turn off the PA. Contacts Enter contacts menu. Add call Add a new call. Dial pad Begin to dial new call. End call End the call. Using the 5inch LTE Smartphone memory card as U disk 1. -
Page 7: Bluetooth
Bluetooth 3.6.1 Turn on Bluetooth or set the phone can be detected 1. Press the Home key, click on Setting 2. Click on “Wireless & networks”, Then Select “Bluetooth” check box, to open Bluetooth. The phone will automatically scan can be used a wireless network. After open, the status bar will appear Bluetooth ( ). -
Page 8: Wireless & Networks
4.3.2 Wireless & networks Disable all wireless connection. Airplane mode: Wi-Fi: select on or off. Set up and management wireless access points, etc. Wi-Fi settings: Set up and management WLAN Direct. Wi-Fi Direct settings: Open/close Bluetooth. ... -
Page 9: Accounts & Sync
application. Manage applications: Management and delete installation applications. Running services: Check and control the currently running services. Storage use: Check the application of storage space. Battery use: Check the power consumption. Development: Set the application development options, set USB debugging, keep sensei state and allow simulation place Settings. -
Page 10: Camera
Camera 1. During the view-finding mode, adjust the lens to allow what is being photographed to appear in the viewfinder. “to take 2. After framing the picture you wish to take, keep the camera steady and press” pictures. 3. After taking photos.Click the photo preview on the bottom right, you can appear in the menu for the following operation: 1. - Page 11 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 12 Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body- worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.