Table of Contents
Advertisement
Quick Links
Applications:
• Rapid disaster deployment
• Handheld relay control for security officer empowerment
(use for functions such as ingress / egress control or
possible duress notifications)
• Random ID challenges
• Security officer booth / ID checks in trucks and buses
• Staff enrollment / asset tracking
• Mustering / emergency assembly points
Ordering Information
HHR-3262-GY
(gray, UPC 816684007293)
HHR-3262-WH
(white, UPC 816684007309)
HHR-3266-GY
(gray, UPC 816684007316)
HHR-3266-WH
(white, UPC 816684007323)
HHR-3267-GY
(gray, UPC 816684007415)
HHR-3267-WH
(white, UPC 816684007422)
HHR-3268-GY
(gray, UPC 816684001536)
HHR-3268-WH
(white, UPC 816684001543)
HHR-3269-GY
(gray, UPC 816684002120)
HHR-3269-WH
(white, UPC 816684002137)
Cypress Integration Solutions
© 2020 Cypress Computer Systems
Credential technologies
Low-frequency (125 kHz) Farpointe Prox, HID Prox, AWID Prox
High/low-frequency (13.56 MHz/125 kHz) HID Prox, Indala Prox,
EM4102, AWID Prox; ISO14443A/B ISO15693, FeliCa™ (IDm); MIFARE
Classic®, MIFARE DESFire® 0.6, MIFARE DESFire® EV1, HID:
iCLASS® Standard/SE/SR/Seos; PIV II, Secure Identity Object® (SIO®)
(HID Reader Module) Global Certifications: UL Recognition (Recognized Component) to UL294 for the USA and CSA
C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE
(HID Reader Module) Government Approvals: FIPS 201 PIV II with inclusion on GSA APL
High-frequency (13.56 MHz) Farpointe Sector, HID iClass® CSN/UID
Outputs
High-frequency (13.56 MHz) HID Prox, Indala Prox, EM4102, AWID
Prox; ISO14443A/B ISO15693, FeliCa™ (IDm); MIFARE Classic®,
MIFARE DESFire® 0.6, MIFARE DESFire® EV1, HID: iCLASS®
Standard/SE/SR/Seos; PIV II, Secure Identity Object® (SIO®)
(HID Reader Module) Global Certifications: UL Recognition (Recognized Component) to UL294 for the USA and CSA
C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE
(HID Reader Module) Government Approvals: FIPS 201 PIV II with inclusion on GSA APL
Low-frequency (125 kHz) HID Prox, Indala Prox, EM4102, AWID Prox;
ISO14443A/B ISO15693, FeliCa™ (IDm); MIFARE Classic®, MIFARE
DESFire® 0.6, MIFARE DESFire® EV1, HID: iCLASS® Standard/SE/
SR/Seos; PIV II, Secure Identity Object® (SIO®)
(HID Reader Module) Global Certifications: UL Recognition (Recognized Component) to UL294 for the USA and CSA
C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE
(HID Reader Module) Government Approvals: FIPS 201 PIV II with inclusion on GSA APL
35+ Years of Access Control Ingenuity
1778 Imlay City Road, Lapeer, MI 48446
HHR-3260 SYSTEM
Handheld Wireless Reader Kit
with 2 readers and dual
Wiegand output
Product Manual
Kit components
HHR-9062-GY / HHR-9062-WH Portable
Proximity RF Card Reader/Dock
HHR-6400 Card Reader base interface
HHR-RCHL Card Reader charging unit
HHR-9066-GY / HHR-9066-WH Portable
Proximity RF Card Reader/Dock
HHR-6400 Card Reader base interface
HHR-RCHL Card Reader charging unit
HHR-9067-GY / HHR-9067-WH Portable
Proximity RF Card Reader/Dock
HHR-6400 Card Reader base interface
HHR-RCHL Card Reader charging unit
HHR-9068-GY / HHR-9068-WH Portable
Proximity RF Card Reader/Dock
HHR-6400 Card Reader base interface
HHR-RCHL Card Reader charging unit
HHR-9069-GY / HHR-9069-WH Portable
Proximity RF Card Reader/Dock
HHR-6400 Card Reader base interface
HHR-RCHL Card Reader charging unit
HHR-3260_201026
CypressIntegration.com
800-807-2977
Advertisement
Table of Contents
Related Manuals for Cypress HHR-3262-GY
Summary of Contents for Cypress HHR-3262-GY
-
Page 1: Credential Technologies & Ordering Information
C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE (HID Reader Module) Government Approvals: FIPS 201 PIV II with inclusion on GSA APL HHR-3260_201026 Cypress Integration Solutions 35+ Years of Access Control Ingenuity CypressIntegration.com © 2020 Cypress Computer Systems 1778 Imlay City Road, Lapeer, MI 48446 800-807-2977... -
Page 2: Benefits Of The Cypress Handheld Wireless Readersystem
Benefits of the Cypress Handheld Wireless Reader System The Cypress Handheld Wireless Reader verifies credentials by wirelessly communicating with a live database through the reader’s Base Unit. A vend button on the Handheld Reader controls a relay, which can be used for functions such as controlling doors or gates, or triggering possible duress notifications. -
Page 3: Table Of Contents
LED indicators Pin layout, Base Unit Base Unit and access control panel interface / wiring diagram Addendum: Handheld Reader channel and address programming Addendum: Reconfiguring the Base Unit radio Addendum: Using the Handheld Wireless Reader system with a Cypress Repeater Page... -
Page 4: Cable Recommendations
HHR-3260 Series Base Unit Cable Recommendations Wiegand and LED PVC - Belden 9873 - 20 AWG 3 pair shielded, 500 feet max. Plenum - Belden 83606 or 85164 - 20 AWG 3 pair shielded, 500 feet max. Power (local) PVC - Belden 8461 - 18 AWG 1 pair, 25 feet max. Plenum - Belden 82740 - 18 AWG 1 pair, 25 feet max. -
Page 5: Bench Testing
Bench Testing Basics: Before field-installing units, they should be tested at a convenient bench top location. This will make it • easier to verify / change settings and check operation when both units are visible, instead of far apart. Handheld Readers and Base Unit should be at least 24 inches apart. •... -
Page 6: Field Installation And Testing
Base Unit as far from the metal as possible using a plastic, wood, or other non-metal spacer. 4. The Base Unit must be mounted in the upright position. When correctly oriented, “Cypress” can be clearly read and the enclosure door will be to the left when open. - Page 7 6. Install a grommet on bottom of the enclosure using the preformed divot as a guide for the drill bit. See lower diagram. 4.65 8.15 1.55 2.99 All dimensions shown are in inches. 1.90 1.45 7. Drill the mounting holes into the mounting surface. a.
- Page 8 Reader’s Green LED will illuminate and the Reader will vibrate. Note: If there is no direct line of sight, if obstacles are present, or if additional distance is needed between the Base Unit and Handheld Reader, a Cypress Repeater unit is recommended. See pg. 14. Page...
-
Page 9: Handheld Reader Diagram
LED Indicators (Handheld Reader and Base Unit) Handheld Reader LEDs Red LED (top left - power & card acknowledge) • Illuminated: Handheld Reader’s power button is activated and unit is on. Briefly blinks off then illuminates: A badge has been sensed. Blue LED (top center - communication status) •... -
Page 10: Pin Layout, Base Unit
HHR-6400 Pin Layout BOARD A 8-16VDC Input Ground Relay 4 N.O. Relay 4 COM Relay 4 N.C. Relay 3 N.O. EXP(+) Relay 3 COM EXP(-) Relay 3 N.C. +5VDC Output Ground Prog Res 2 Aux Output Prog Res 1 Relay 2 Input LED Input Relay 1 Input D1 / Data Output... -
Page 11: Base Unit And Access Control Panel Interface / Wiring Diagram
HHR-6400 - Wiegand Base Unit Panel Interface DC Power Supply BOARD A Power Ground +8 to +16 VDC Relay 4 N.O. Access Ground Relay 4 Com Control Relay 4 N.C. Panel exp(+) Relay 3 N.O. exp(-) Relay 3 Com +5V Out Relay 3 N.C. -
Page 12: Addendum: Handheld Reader Channel And Address Programming
ADDENDUM Handheld Reader Channel and Address Programming Handheld Readers will provide for field selection of Channel (2-14) and Network Address (0-1) using programming cards. The channel programming cards (Part no. WMR-PRC1-99) are labeled Channel 2-14. Handheld wireless networks are separated through the use of separate channels. A Reader is shipped preconfigured to communicate with its Base Unit over one specific channel. -
Page 13: Addendum: Reconfiguring The Base Unit Radio
Reconfiguring the Base Unit Radio Units in the Handheld Reader Kit are factory-configured to communicate with each other. Use the 10-position DIP switch bank on the daughterboard to re-configure radio settings as necessary for the following applications: Changing the channel of the radio •... -
Page 14: Addendum: Using The Handheld Wireless Reader System With A Cypress Repeater
Obstruction RPT-5651 Basics: The Cypress Repeater is used to get around obstacles that prevent a clear line of sight between the Handheld Reader and the Base Unit. It is mounted similar to the Base Unit. Please review pg. 6. Installation: Find a suitable location for the Cypress Repeater Unit between the area where the Handheld Reader will be used and the Base Unit.
Need help?
Do you have a question about the HHR-3262-GY and is the answer not in the manual?
Questions and answers