Table of Contents
Advertisement
Quick Links
Applications:
• Rapid disaster deployment
• Handheld relay control for security officer
empowerment (use for functions such as ingress
/ egress control or possible
duress notifications)
• Random ID challenges
• Security officer booth / ID checks in trucks and
buses
• Staff enrollment / asset tracking
• Mustering / emergency assembly points
HHR-3162-GY
(gray, UPC
816684007279)
HHR-3162-WH
(white, UPC
816684007286)
HHR-3166-GY
(gray, UPC
816684007255)
HHR-3166-WH
(white, UPC
Credential
816684007262)
Technologies
and
Ordering
Information
HHR-3168-GY
(gray, UPC
816684001512)
HHR-3168-WH
(white, UPC
816684001529)
Cypress Integration Solutions
© 2020 Cypress Computer Systems
Credential technologies: Farpointe
Prox, HID Prox, AWID Prox (125 kHz)
Credential technologies: HID Prox,
EM4102, AWID Prox; ISO14443A/B
ISO15693, FeliCa™ (IDm); MIFARE
Classic®, MIFARE DESFire® 0.6,
MIFARE DESFire® EV1 (32 bit CSN),
HID: iCLASS® Standard/SE/SR/Seos;
PIV II, Secure Identity Object® (SIO®)
Global Certifications: UL Recognition (Recognized Component) to UL294 for the USA and
CSA C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE
Government Approvals: FIPS 201 PIV II with inclusion on GSA APL
Credential technologies: ISO14443A/B
ISO15693, FeliCa™ (IDm); MIFARE
Classic®, MIFARE DESFire® 0.6,
MIFARE DESFire® EV1, HID:
iCLASS® Standard/SE/SR/Seos; PIV
II, Secure Identity Object® (SIO®)
Global Certifications: UL Recognition (Recognized Component) to UL294 for the USA and
CSA C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE
Government Approvals: FIPS 201 PIV II with inclusion on GSA APL
35+ Years of Access Control Ingenuity
1778 Imlay City Road, Lapeer, MI 48446
HHR-3160 SYSTEM
Handheld Wireless Reader Kit
with single Wiegand output
HHR-3162 Kit components:
HHR-9062-GY / HHR-9062-WH
Portable Proximity RF Card Reader/Dock
HHR-6300 Card Reader base interface
HHR-RCHL Card Reader charging unit
HHR-3166 Kit components
HHR-9066-GY / HHR-9066-WH
Portable Proximity RF Card Reader/Dock
HHR-6300 Card Reader base interface
HHR-RCHL Card Reader charging unit
HHR-3168 Kit components
HHR-9068-GY / HHR-9068-WH
HHR-6300 Card Reader base interface
HHR-RCHL Card Reader charging unit
Product Manual
HHR-3160_201026
CypressIntegration.com
800-807-2977
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cypress HHR-3162
Summary of Contents for Cypress HHR-3162
- Page 1 CSA C22.2 No. 205 for Canada. CE, FCC 47 Part 15 modular approval, RoHS, WEEE Government Approvals: FIPS 201 PIV II with inclusion on GSA APL HHR-3160_201026 Cypress Integration Solutions 35+ Years of Access Control Ingenuity CypressIntegration.com © 2020 Cypress Computer Systems 1778 Imlay City Road, Lapeer, MI 48446 800-807-2977...
-
Page 2: Benefits Of The Cypress Handheld Wireless Readersystem
Specifications Handheld Reader 6.81” x 3.63” x 1.58” (17.30 x 9.22 x 4.01 cm) / 1.2 lbs (0.54 kg) Physical Charging Dock 4.76” x 4.1” x 2.2” (12.09 x 10.41 x 5.59 cm) / 0.35 lbs (0.16 kg) Base Unit 9.25”... -
Page 3: Table Of Contents
Benefits of the Cypress Handheld Wireless Reader System The Cypress Handheld Wireless Reader verifies credentials by wirelessly communicating with a live database through the reader’s Base Unit. A vend button on the Handheld Reader controls a relay, which can be used for functions such as controlling doors or gates, or triggering possible duress notifications. -
Page 4: Cable Recommendations
HHR-3160 Series Base Unit Cable Recommendations Wiegand and LED PVC - Belden 9873 - 20 AWG 3 pair shielded, 500 feet max. Plenum - Belden 83606 or 85164 - 20 AWG 3 pair shielded, 500 feet max. Power (local) PVC - Belden 8461 - 18 AWG 1 pair, 25 feet max. Plenum - Belden 82740 - 18 AWG 1 pair, 25 feet max. -
Page 5: Bench Testing
Bench Testing Basics: Before field-installing units, they should be tested at a convenient bench top location. This will make it • easier to verify / change settings and check operation when both units are visible, instead of far apart. Handheld Reader and Base Unit should be at least 24 inches apart. •... -
Page 6: Field Installation And Testing
Base Unit as far from the metal as possible using a plastic, wood, or other non-metal spacer. 4. The Base Unit must be mounted in the upright position. When correctly oriented, “Cypress” can be clearly read and the enclosure door will be to the left when open. - Page 7 6. Install a grommet on bottom of the enclosure using the preformed divot as a guide for the drill bit. See lower diagram. 4.65 8.15 1.55 2.99 All dimensions shown are in inches. 1.90 1.45 7. Drill the mounting holes into the mounting surface. a.
- Page 8 Reader’s Green LED will illuminate and the Reader will vibrate. Note: If there is no direct line of sight, if obstacles are present, or if additional distance is needed between the Base Unit and Handheld Reader, a Cypress Repeater unit is recommended. See pg. 14. Page...
-
Page 9: Handheld Reader Diagram
LED Indicators (Handheld Reader and Base Unit) Handheld Reader LEDs Red LED (top left - power & card acknowledge) • Illuminated: Handheld Reader’s power button is activated and unit is on. Briefly blinks off then illuminates: A badge has been sensed. Blue LED (top center - communication status) •... -
Page 10: Pin Layout, Base Unit
HHR-6300 Pin Layout 8-16VDC Input Ground Relay 4 N.O. Relay 4 COM Relay 4 N.C. Relay 3 N.O. EXP(+) Relay 3 COM EXP(-) Relay 3 N.C. +5VDC Output Ground Prog Res 2 Aux Output Prog Res 1 Relay 2 Input LED Input Relay 1 Input D1 / Data Output... -
Page 11: Base Unit And Access Control Panel Interface / Wiring Diagram
WMR-6300 - Wiegand Base Unit Panel Interface DC Power Supply Power Ground +8 to +16 VDC Relay 4 N.O. Access Ground Relay 4 Com Control Relay 4 N.C. Panel exp(+) Relay 3 N.O. exp(-) Relay 3 Com +5V Out Relay 3 N.C. P R 4 Ground P R 3... -
Page 12: Addendum: Handheld Reader Channel And Address Programming
ADDENDUM Handheld Reader Channel and Address Programming Handheld Readers will provide for field selection of Channel (2-14) and Network Address (0-1) using programming cards. The channel programming cards (Part no. WMR-PRC1-99) are labeled Channel 2-14. Handheld wireless networks are separated through the use of separate channels. A Reader is shipped preconfigured to communicate with its Base Unit over one specific channel. -
Page 13: Addendum: Reconfiguring The Base Unit Radio
Reconfiguring the Base Unit Radio Units in the Handheld Reader Kit are factory-configured to communicate with each other. Use the 10-position DIP switch bank on the daughterboard to re-configure radio settings as necessary for the following applications: Changing the channel of the radio •... -
Page 14: Addendum: Using The Handheld Wireless Reader System With A Cypress Repeater
Obstruction RPT-5651 Basics: The Cypress Repeater is used to get around obstacles that prevent a clear line of sight between the Handheld Reader and the Base Unit. It is mounted similar to the Base Unit. Please review pg. 6. Installation: Find a suitable location for the Cypress Repeater Unit between the area where the Handheld Reader will be used and the Base Unit.
Need help?
Do you have a question about the HHR-3162 and is the answer not in the manual?
Questions and answers