Huawei Ascend P1 XL User Manual page 7

Table of Contents

Advertisement

• Steady green: The phone is charging and the battery level is
high or full.
• Steady yellow: The phone is charging and the battery level is
higher than 10%.
• Steady red: The phone is charging and the battery level is
low.
• Blinking red: The battery level is low and the phone needs to
be charged.
If your phone is powered on, the charging icon is displayed in
the notification bar while the battery is charging. When the icon
changes to
, the battery is fully charged.
Important Information About the Battery
• If the phone has not been used for a long time, or the battery
is fully depleted, you may not be able to power on your phone
6
immediately after you commence charging the battery. Allow
the battery to charge for a few minutes with the phone
powered off before attempting to use the phone.
• Rechargeable batteries have a limited number of charge
cycles and may eventually need to be replaced. When the
battery life becomes noticeably shorter after being fully
charged, replace the battery with a new one of the same type.
• Do not attempt to replace the phone battery yourself. To
replace the battery, contact Huawei or an authorized service
provider.
• Using data services increases the phone's power
consumption and will reduce battery life.
• The time required to fully charge the battery depends on the
ambient temperature and the age of the battery.

Advertisement

Table of Contents
loading

This manual is also suitable for:

U9200e

Table of Contents