Philips 7810XL/18 Manual page 9

ENGLISH
16
1 Always turn razor OFF, unplug from outlet
and remove cord from razor before
cleaning.
C
2
Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3
Clean inside razor heads and hair chamber
by running under hot water.
C
4 Clean outside of Razor Head Assembly by
running under hot water.
5 Close the Razor Head Assembly and shake
off excess water.
C
6
Open Razor Head assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue. This could damage the
shaving heads.
C
7 If the shaving unit becomes detached from
the razor, you can easily reattach it.
8 You may also clean the hair chamber
without water by using the supplied brush.
Once A Month: Razor Heads
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1
Turn razor OFF, remove the charging plug
from the outlet and cord from the razor.
C
2 Press the razor head release button to
open the Razor Head Assembly.
C
3
Turn the black 3-pronged locking bracket
counterclockwise to unlock (1) and
remove the retaining frame (2).
C
4 Remove and clean one set of cutters and
combs at a time.
C
5
Separate the cutter from the comb and
rinse clean under hot water.
ENGLISH
17