Flowzone CYCLONE 2V Operation Manual page 8

STEP 2.
Preparing to spray:
1.
Fully charge the battery prior to first operation.
NOTE: The flashing green light on charger indicates that
battery is charging when all lights stop flashing, the
battery is fully charged.
2.
Fill the tank with pre-prepared liquid through
the intake filter and securely tighten the
tank cap.
NOTE: Always mix liquid solution in a separate
container.
3.
Determine which nozzle is right for the job
& connect to spray wand by pulling down on
quick-connect and inserting nozzle.
a) Adjustable nozzle = ranges from jet stream to
conical stream
b) Fan nozzle = flat 25º stream
c) Jet nozzle = narrow stream
4.
Turn pump on by twisting the dial to the desired
amount of pressure.
5.
Begin spraying by squeezing spray trigger.
4
1.
3.
a)
b)
c)
5.
2.
4.
Copyright © WESSOL, LLC