Programming Tracks; For A Cd; For Mp3 Files; Erasing The Program - Pioneer X-EM26 Operating Instructions Manual

Playing

Programming tracks

Note
• You can program up to 20 tracks.
• During programming, if no operation is made within 20
seconds, the system returns to the stop mode without
saving earlier operations.

For a CD

1 Press ∫ to stop playback.
[[T0]], the total number of tracks, and the duration time are
displayed.
2 Press PROGRAM to activate the
programming.
[01 PR01] (the sequence number) are displayed with [01]
blinking.
3 Press :/9 to select a track.
4 Press PROGRAM again to program the
selected track.
5 Repeat steps 3 and 4 to program more
tracks.
6 Press 1; to start playback.

For MP3 files

1 Press ∫ to stop playback.
[F XX] (XX indicates the total number of albums) and [XXX]
(XXX indicates the total number of tracks) are displayed.
2 Press PROGRAM to activate the
programming.
[01 PR01] are displayed with [01] blinking.
3 Press /9 repeatedly to select an album.
[F XX] (XX indicates the album number) are displayed.
4 Press :/9 repeatedly to select a track.
[XXX] (XXX indicates the track number) are displayed.
5 Press PROGRAM again to confirm the
selected track.
6 Repeat steps 3 to 5 to program more tracks.
7 Press 1; to start playback.

Erasing the program

1 To erase the program,
• Switch to another source.
05
15
En