Playing; Playing A Disc; Playing From A Usb Storage Device; Controlling Playback - Pioneer X-EM26 Operating Instructions Manual

05

Playing

Chapter 5:
Playing

Playing a disc

1 Press DISC on the remote control or INPUT
repeatedly on the main unit to switch the source
to [DISC].
2 Press < to eject the disc tray.
3 Load a disc with the printed side facing up.
4 Press < again to close the disc tray.
Playback starts automatically after a few seconds.
• If playback does not start automatically, press 1; to
start playback.

Playing from a USB storage device

This system can play .mp3 files that are copied onto a
supported USB storage device:
• Flash drive
• Memory card reader
• HDD: hard disk drive (This product can detect only a
portable HDD with USB power peak current no more
than 500 mA.)
Note
• Pioneer does not guarantee compatibility with all USB
storage devices.
• NTFS (New Technology File System) file system is not
supported.
14
En
1 Connect the USB storage device to the USB
socket.
2 Press USB on the remote control or INPUT
repeatedly on the main unit to switch the source
to [USB].
Playback starts automatically.
If playback does not start automatically,
Press / to select an album.
1
2 Press :/9 to select a track.
3 Press 1; to start playback.

Controlling playback

During playback, follow the instructions below to control
playback.
Buttons Functions
1; Pause or resume playback.
∫
Skip to the previous or next track.
:/9
Press and hold to rewind a track or
search forward fast within a track.
Skip to the previous or next album
/9
when no less than one album exists.
Select an available play mode.
• Repeat 1 [REP ONE]: repeat the
current track
• Repeat all [REP ALL]: repeat all
REPEAT
tracks
• Repeat album [REP ALB]: repeat
the current album (only USB
function)
Select an available play mode.
• Shuffle
SHUFFLE
Shuffle
Stop playback.
: play tracks randomly
is unavailable for
programmed tracks.