Siemens WM16Y890DN Instruction Manual And Installation Instructions page 31

Table of Contents

Advertisement

Buttons
i-Dos
light – normal –
strong – off
i-Dos
light – normal –
strong – off
ß
Press
(Options) button
to select:
Pre-wash
on – off
Less Ironing
on – off
Extra rinse
ö
+ 1 Rinse
÷
+ 2 Rinses
ø
+ 3 Rinses
Water Plus
on – off
Rinse Hold
on – off
Notes
ô
i
To change the softener dosage strength (or deter-
I
gent when container content: detergent set) for the
selected programme permanently until the next
change:
– light: slightly soft washing
– normal: normally soft washing
– strong: especially soft washing
ô
To change the detergent dosage strength for the se-
lected programme permanently until the next change:
– light: lightly soiled washing
– normal: normally soiled washing
– strong: heavily soiled or stained washing
Notes
For heavily soiled washing.
For intelligent dosage: Selected detergent is used
for prewash and main wash. To prevent overdosage,
select medium i-Dos setting.
For manual dosage: Divide detergent for pre-wash
and main wash. Put detergent for prewash in the
drum and pour detergent for main wash in
dispenser
Reduces creasing by special spin sequence followed
²
by fluffing and reduced spin speed.
creased.
Additional rinse cycles depending on the pro-
²
gramme, prolonged programme duration.
tive skin or/and in areas with very soft water.
Increased water level, more gentle treatment of the
washing.
The washing remains in the water after the last rinse
cycle. End the programme.
À Á
.
Residual moisture of the washing slightly in-
Recommended application: for particularly sensi-
31

Advertisement

Table of Contents
loading

Table of Contents