PDQ 6300 Installation Instruction

6300/6400R/RF EXIT INSTALLATION INSTRUCTION
RIM DEVICE
2. SIZE DEVICE
 Standard lengths are for 36" or 48" door.
Device must be cut for other lengths.
 Mark length with tape – length equals
device size minus desired door size (for
30" door = cut 6" off 36" device) ensuring
a square cut.
40" To Finished Floor
Reinforced Steel
or Aluminum Door
Solid Wood Door Drill 1/8" Pilot Hole for #10 Wood Screw
All Others
Phone: 833-2-PDQTEC | www.pdqlocks.com
1. PREPARE DOOR
 Prepare door and frame according to
template.
 Refer to trim template if installing trim.
Maximum cut off length:
Panic Fire Alarm MLR
36" Device 6"
48" Device 12"
3. INSTALL DEVICE
 Install device and trim with 1/4-20 screws
from pack #639043.
 Device can be surface mounted to the
door, optional sex nuts are available,
device is through bolted if using trim.
Mounting Options:
Surface Mount: Drill/Tap push side for 1/4-20
Use optional Sex Bolts. Drill push side with
9/32" drill bit. Drill pull side with 3/8" drill bit.
1
8" 2" 3"
14" 8" 9"
639400 Rev0 – 12/12/21