Table of Contents
Advertisement
Option 1: Mount on door (front or rear)
You can mount the speakers on the front/rear door of your car.
Note
•
Make sure that nothing obstructs around the mounting location of the door.
•
A hole for mounting may already be cut out of the inner panel of the door
(front or rear). In this case, you need to modify the board only.
•
Ensure that the speaker terminals, frame or magnet do not interfere with any
inner parts, such as the window mechanism in the door (when you open or
close the window), etc. Also ensure that the speaker grille does not touch any
inner fittings, such as the window cranks, door handles, arm rests etc.
1
Turn off the car ignition key.
If the power is on, the click noise generated by the
•
connection may damage the speakers.
2
Cut out the mounting template from the packing box.
3
Paste the template on the location selected for mounting the
speaker.
4
Mark the cut-off hole and the 4 bolt holes.
5
Cut out the marked area and drill the bolt holes.
Advertisement
Table of Contents
