6
Remove the grille net.
7
Strip the speaker wires and connect them to the amplifier.
Black wire: connect to left speaker
•
Black (white lined): connect to right speaker
•
Right
Amplifier
Left
Note
•
Match the "left", "right", "+" and "-" terminals correctly. Revised polarity may
degrade sound quality.
•
Two 4-ohm speakers, wired in stereo, present a 4 ohm load to each channel
of the amplifier. Most two channel amplifiers work well in this configuration.
However, if two 4-ohm speakers, wired in parallel to a bridged two -channel
amplifier, present a 2-ohm mono load to the amplifier. Most 2-channel
amplifiers do not support 2-ohm mono operation! Amplifier damage may
result!
White lined
White lined
Black
Black
Right
CSP410
Left