Operation - Craftsman CMPCS38 Instruction Manual

Oil Free Motor
The fastener is designed to be used without the need to add
any air tool oil and still deliver long life. If air tool oil is added
to tool it will still function properly.

OPERATION


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove air supply before
making any adjustments or removing/installing
attachments or accessories. An accidental
actuation can cause injury.
Proper Hand Position (Fig. B)

WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the handle
After driving a fastener, this tool may spring back ("recoil").
Fig. B
Loading (Fig. C–F)

WARNING: Be careful when handling fasteners,
especially when loading and unloading, as the
fasteners have sharp points.
1. Remove the air supply
7
2. Hold stapler upside down as shown and release
loading hatch by pushing in the loading hatch
6
release button 5 .
3. Draw the loading hatch from the tool.
4. Place one stick of staples in bottom channel so legs are
pointing up. Push loading hatch closed, making sure the
loading hatch release button engages.
5. For brads, place only on left side (direction as shown
on the magazine liner). Be sure nail heads are pointing
down. Push loading hatch closed, making sure the
loading hatch release button engages.
1 .
1
from the 1/4" male fitting .
4
Fig. C
Fig. D
6
Fig. E
Fig. F
English
4 7
5
5