Rane serato SCRATCH LIVE Quick Start

QUICK START
Installation
1) Install the software
Mac
1. Insert the Software Installation CD and double-click the in-
staller icon.
Windows XP
1. Insert the Software Installation CD. If Setup doesn't start auto-
matically, browse to the CD drive and run
2. Follow the on-screen instructions. Once the installation is
complete, Scratch Live appears in the Start Menu under All
Programs > Serato > Scratch Live
Connections
1. Connect your turntables (or CD players
) to INPUTS 1 and 2 of the Scratch LIVE
hardware.
2. Connect the LINE OUTPUTS of the Scratch
LIVE hardware to the Line Inputs on
your DJ mixer, check that those inputs are
switched to line level.
3. Connect the USB cable from the Scratch
LIVE hardware to your Mac or PC.
Optional extra connections
• If you are using turntables, connect their
ground wires to the ground post of your
mixer.
• Connect the THRU OUTPUTS of the
Scratch LIVE hardware to the mixer's
phono inputs when using turntables; con-
nect these to the mixer's line inputs when
using CD players. This allows you to bypass
Scratch LIVE to play normal records or
CDs.
• Connect a dynamic microphone to the MIC
INPUT of the Scratch LIVE hardware to
scratch your own mic recordings as if they
are on vinyl.
• Connect a ¼" to ¼" cable from the MIC
THRU jack on the Scratch LIVE hardware
to the microphone input on your DJ mixer
to allow normal use of the microphone,
independent of Scratch LIVE. (Note: power
is required, either from the USB port or an
external 9VDC power supply. See manual
for details.)
.
setup.exe
.
��������� ���
2) Connect and Install the Hardware
Mac
Mac users need only connect the hardware after installing the
software. No extra hardware installation is required.
Windows XP
1. Connect the Scratch LIVE Interface to your computer using the
supplied USB cable.
2. The
Windows New Hardware Wizard
3. Insert the Software Installation CD if it's not already inserted,
then press .
Next
4. Windows may complain that the software driver is not digitally
signed. Choose
Continue Anyway
5. Click once installation is complete.
Finish
���
������
��� �� ����� ���� ����� ����
appears.
.
������ ��������� ���
������