Advertisement
Advertisement
Table of Contents
Related Manuals for Digitus DA-10080
Summary of Contents for Digitus DA-10080
- Page 1 Wireless Charging Pad, magnetic Quick Installation Guide DA-10080...
- Page 2 1. INTRODUCTION The magnetic charging pad from DIGITUS® automatically latches on to the optimal charging position of the iPhone® to guarantee efficient charging. The induction charger features an integrated 1.0m long USB-C charging cable and works with all Apple Mag Safe®-compatible products.
- Page 3 3. PACKAGE CONTENT 1x Wireless charging pad, magnetic 1x QIG (Quick Installation Guide) NOTE: This charger is designed for Qi-compatible devices if your phone does not have built-in Qi wireless charging capabilities, please use a certified Qi wireless charging case or receiver.
- Page 4 Wireless Charger Output 15W/10W/7.5W/5W This charger magnetically snaps to the back of an iPhone 12/13 or to its MagSafe case or sleeve (sold separately) and aligns iPhone properly, allowing you to hold and use iPhone while it’s charging. USB-C Cable...
- Page 5 You can also use MagSafe Charger with other phone models that support wireless charging. Plug the USB-C connector to a 20W PD or greater USB-C power adapter or compatible third-party USB-C adapter (9V/2.22A or 9V/1.67A and higher). NOTE: You can also connect to a USB-C port on a Mac or PC. The charger will also function with power adapters that provide a minimum 12W (5V/2.4A) of power, but this will result in slower charging.
- Page 6 IPhone 12/13 models Place the charger on the back of the iPhone or its Mag Safe case or sleeve. When the iPhone starts charging, the green charging symbol appears. NOTE: If an iPhone Leather Wallet is attached, remove it before placing the charger on the back of the case.
- Page 7 Frequency band(s): Maximum radio-frequency 110-205khz power transmitted -21.28 dBuA/m Read all safety instructions and warnings prior to using this product. Improper use and failure to follow safety guidelines could result in hazards, injury and/or property damage that is not the manufacturer’s responsibility. The user is responsible for maintaining this product with care for maximum use.
- Page 8 Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com ASSMANN Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany...
Need help?
Do you have a question about the DA-10080 and is the answer not in the manual?
Questions and answers