Kramer KDS-7-MNGR Quick Start Manual

Scan for full manual
Step 1: Check what's in the box
KDS-7-MNGR 4K AVoIP Manager
Step 2: Get to know your KDS-7-MNGR
# Feature
1 USB Type A Charging
Ports
2 LCD Display

3 Menu Navigation
Button



Enter
4 LINK LED
5 NET LED
6 ON LED
7 24V DC Port
8 RESET Recessed Button
9 LAN Port
10 HDMI OUT Port
LED Functionality
KDS-7-MNGR LEDs function as follows:
LED Color
LINK LED Lights Green
NET LED Off
Lights green
Flashes Green very fast (for 60sec)
Lights Yellow
Lights Red
ON LED Flashes Red
Lights Green
Flashes Green Slowly
Flashes green fast
Flashes Green very fast (for 60sec)
Lights Yellow
Lights Red
Post reboot, all LEDs light for 3 seconds then return to their normal LED display mode.
KDS-7-MNGR Quick Start
KDS-7-MNGR Quick Start Guide
This guide helps you install and use your
Go to www.kramerav.com/downloads/KDS-7-MNGR
firmware upgrades are available.
Function
Connect to a keyboard and mouse to
via HDMI output port
.
Use for device information and configuration.
Press to return to the previous menu.
Press to move up to the next configuration parameter.
Press to go to the next menu.
Press to move down to the next configuration parameter.
Press to accept changes.
See LED Functionality.
See LED Functionality.
See LED Functionality.
Plug the 24V DC power adapter into the unit and connect it to an AC wall outlet for power. (Optional,
not required if the unit is powered via PoE).
Press and hold for about 20 seconds, until all LEDs flash, to reset the device to its factory default
values..
Connect directly, or through a network switch, to your PC/ laptop to control the unit via WebGUI/Telnet.
Connect to a display to control the unit directly.
Definition
A link is established between
signals.
No IP address is acquired.
A valid IP address has been acquired.
A device identification command is sent (Flag me).
Device falls back to default IP address.
Security is blocking IP access.
On fallback address acquiring, device 'ON' LED flashes continuously in slow
0.5/10sec cadence
When power is on.
Device is in standby mode.
FW is downloaded in the background.
A device identification command is sent (Flag me).
Device falls back to default IP address
Security is blocking IP access.
KDS-7-MNGR for the first time.
to download the latest user manual and check if
1 Quick start guide
control the units via UI using a display connected to the unit
KDS-7-MNGR
P/N: 2 9 0 0 - 3 0 1 5 0 5 QS
2 Bracket sets
and the TV and is transmitting A/V
Rev: 1