Black & Decker BPACT08WT Instruction Manual page 14

SET UP & USE
COOL MODE
Ideal for hot weather when you need to cool and dehumidify the room. To set
operation of the appliance correctly, press the Temp Up
buttons until the desired temperature is displayed.
Then select the fan speed by pressing the Fan Speed Button until the light
corresponding to the required fan speed lights up:
HIGH: The fan operates at maximum to reach the required temperatures as rapidly as
possible.
MED: Reduces Fan noise level but still maintains a good level of comfort.
LOW: For quiet operation.
AUTO: The appliance automatically selects the most suitable fan speed in relation to
the temperature set on the digital display.
DEHUMIDIFY MODE
Ideal for reducing humidity in spring and autumn, during rainy spells or in damp
rooms, etc.
Exhaust hose attachment is recommended for more effective dehumidification but
not required.
In dehumidify mode, the fan speed is automatically set to a low speed and cannot be
adjusted.
When an error code appears on the display screen on the control panel "E2", the unit
will have to be drained.
FAN MODE
Press the mode key until the fan mode indicator lights up, indicating that the fan
function is selected.
Press the speed button to select the appropriate fan speed.
HEAT MODE
Press the MODE
target temperature by pressing the
displayed. (Temperature range is 61
Then select the fan speed by pressing the Fan Speed Button until the light
corresponding to the desired fan speed lights up: HIGH, MED, LOW, AUTO.
NOTE: At the beginning of this mode, you may have to wait a few seconds before the
appliance starts to give out hot air.
When an error code appears on the display screen "E4" in HEAT mode, the unit will
have to be drained.
NOTE: AUTO speed can only be selected using the control panel.
Page 14
(Heat models BPACT12HWT and BPACT14HWT only)
button until the HEAT mode indicator light appears. Select the
o
or button until the corresponding value is
F-88 F (16 C-31 C)
o o o
or Temp Down