Specifications 79165 Input voltage, V Output voltage, V Mains voltage range, V 100-240 Compatible with batteries APS2/APS3 Charge temperature range (RH 0 … 45 °С 60±25%) Dimensions, mm 71x32x31 Weight, kg 0.05...
Description APS Battery Charger is designed to charge Battery Packs APS2 and APS3 used with digital and thermal riflescopes, thermal monoculars by Pulsar.
Battery Charging 1. Install the rechargeable battery (not included) (1) along the guides until stop into the charger's (4) slot. 2. Point А on the battery and point B on the charger should match. 3. You can charge two batteries at the same time – a second slot is designed for this purpose.
Page 8
Battery charge from 0 to 10%. Charger connected to the mains power supply Battery charge from 10 to 20% Image not found or type unknown Battery charge from 20 to 60% Battery charge from 60 to 95% Image not found or type unknown Image not found or type unknown Battery completely charged.
Safety Measures Only use this APS Battery Charger or the charger from the package contents of your device to charge APS2/APS3 batteries. The use of any other charger may irreparably damage the Battery Pack or the charger and may cause fire.
Legal Compliances and Disclaimers The manufacturer reserves the right at any time, without mandatory notice, to make changes to the package contents, design and characteristics that do not impair the quality of the product.
Need help?
Do you have a question about the APS Battery Charger and is the answer not in the manual?
Questions and answers