Product Information - Philips AZ1047/94 User Manual

• Ensure that the power cord is connected securely.
• Ensure that there is power at the power supply socket.
• Ensure that the batteries are installed correctly.
No sound
•
Adjust the volume.
•
Ensure that the track played is of a compatible format.
Display does not function properly./No reaction to operation of any of the controls.
1
Disconnect the AC power cord.
2
Connect the AC power cord after a few seconds.
Cannot play disc
•
Ensure that the disc label is inserted with the printed side facing up.
• Wipe the disc with fi bre cleaning cloth from the centre to the edge in a straight line.
• This disc may be defective. Play another disc.
• Ensure that the CD is a fi nalised CD/CD-R/CD-RW.
• Ensure that the laser lens is clean.
•
Ensure that the CD is not encoded with copyright protection technologies.
The CD skips tracks
•
Ensure that the CD is not damaged or dirty.
• Ensure that program/shuffl e mode is deactivated.
Poor cassette sound quality
•
Ensure that heads in the cassette holder are clean.
•
Ensure that a NORMAL (IECI) cassette tape is used for record.
Cassette does not work for record
•
Ensure that cassette tabs are not broken.

6 Product information

Note
•
Product information is subject to change without prior notice.
Dimensions (Main unit)
(W x H x D)
Weight (Main unit)
Power supply
Power consumption
Power output
Operating temperature range
291 x 146 x 243 mm
11.5 x 5.8 x 9.6 inches
1.8 kg
3.8 pound
DC 9V 1.5 A
AC 110~127 / 220~240 V
Active 12W
Standby < 2W
2 x 1W RMS
-10°C - +50°C
14°F - 122°F