Related Manuals for Philips AZ1040/17
Summary of Contents for Philips AZ1040/17
- Page 1 AZ 1040 CD Radio Cassette Recorder Toll Free Help Line Ligne d'assistance en service libre Linea de ayuda telefónica sin cargo 800-531-0039...
- Page 2 78 9 &...
- Page 3 CONTROLS TOP AND FRONT PANELS 1 VOLUME - adjusts the volume level 2 DBB (Dynamic Bass Boost) - enhances the bass 3 POWER slider - selects the sound source for CD/ TUNER/ TAPE and also switches the set off 4 p - 3.5 mm stereo headphone jack Note: Connecting headphones will switch off the speakers.
-
Page 4: Power Supply
Whenever convenient, use the power supply if you want to conserve battery life. Make sure you remove the plug from the set and wall outlet before inserting batteries. BATTERIES (NOT INCLUDED) 1. Open the battery compartment and insert six batteries, type R-20, UM-1 or D-cells, (preferably alkaline) with the correct polarity as indicated by the "... -
Page 5: Basic Functions
1. Turn VOLUME to the desired level. 2. Adjust the DBB control to select dynamic bass boost on or off. PHILIPS demo mode 1. Press the CD STOP 9 button for 5 seconds. ™ After about 30 seconds, PH..IL ..IPS scrolls across the display. -
Page 6: Digital Tuner
TUNING TO RADIO STATIONS 1. Select TUNER source. ™ is displayed briefly and then the radio station frequency is shown. 2. Press BAND once or more to select your waveband. 3. Press SEARCH ∞ or § and release when the frequency in the display changes. -
Page 7: Selecting A Different Track
CD PLAYER Playing a CD 1. Select CD source. ™ is displayed briefly. 2. Press OPEN•CLOSE to open the CD door. ™ Display: when you open the CD door. 3. Insert a CD or CD-R(W) with the printed side facing up and press OPEN•CLOSE to close the CD door. -
Page 8: Different Play Modes: Shuffle And Repeat
Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ program are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ program continuously in random order... -
Page 9: Cassette Recorder
CD PLAYER Erasing a program You can erase the program by: – pressing STOP 9 once in the STOP position or twice during playback. The display shows ' – pressing the CD door open; – switching to another source: TUNER/TAPE. CD player and CD handling •... -
Page 10: General Information On Recording
GENERAL INFORMATION ON RECORDING • Recording is permissible insofar as copyright or other rights of third parties are not infringed. • This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use only NORMAL type cassettes (IEC I) on which the tabs have not been broken. -
Page 11: Maintenance
RECORDING Recording from the radio 1. Tune to the desired radio station (See TUNING TO RADIO STATIONS). 2. Press STOP•OPEN 9/ to open the cassette door. 3. Insert a suitable cassette into the cassette deck and close the cassette door. 4. -
Page 12: Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center. WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty.
Need help?
Do you have a question about the AZ1040/17 and is the answer not in the manual?
Questions and answers
CDs do not play. CDs do not spin
CDs may not play or spin on the Philips AZ1040/17 due to the following reasons:
- The CD-R(W) is blank or not finalized — use a finalized CD-R(W).
- The CD is badly scratched or dirty — clean or replace the CD.
- The CD is damaged — replace the CD.
- SHUFFLE or PROGRAM mode is active — quit SHUFFLE/PROGRAM mode.
- The power cord is not securely connected — connect the power cord properly.
- The batteries are dead or incorrectly inserted — insert fresh batteries correctly.
This answer is automatically generated
radio plays cassette works cd spins for two seconds then stops wheni hit play cd does not spin
The Philips AZ1040/17 CD player may spin for two seconds and then stop when you hit play due to condensation on the lens, especially after a sudden temperature change. This prevents the CD from being read. Leave the unit in a warm environment until the moisture evaporates. Do not attempt to clean the lens.
This answer is automatically generated
@Mr. Anderson the player has been in a stable room temp temp is not the prob