Table of Contents
Advertisement
Connecting the power cord
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
Connecting additional
equipment
IMPORTANT!
– Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
Digital amplifier
(for example)
DIGITAL IN
CD Recorder
(for example)
DIGITAL IN
Active subwoofer
(for example)
OPTICAL
AUDIO
INPUT
AUDIO IN
L
R
VCR
(for example)
Viewing and listening to the playback of
other equipment
●
Connect the system's AUX IN (R/L) jacks to
the AUDIO OUT jacks on the other audio/
visual device (such as a TV, VCR, Laser Disc player
or cassette deck).
Before starting operation, press AUX on the
remote repeatedly in order to activate the input
source (AUX1 or AUX2).
Connecting an active subwoofer
●
Connect the DVD micro system's WOOFER
OUT jack to the AUDIO INPUT jack on an
active woofer (not supplied).
Recording (digital)
●
Connect the system's DIGITAL OUT
(COAXIAL or OPTICAL) jack to the
DIGITAL IN jack on a digital recording device.
Before starting operation, set SPDIF
according to the audio connection. (See "SPDIF
Setup").
Connecting a digital amplifier
●
Connect the DIGITAL OUT (COAXIAL or
OPTICAL) port to the coaxial/optical input
jack of a digital amplifier with a coaxial/optical
cable (not supplied) for superior digital sound
effect.
Connections
9
Advertisement
Table of Contents
