Advertisement
Data Plan/ 数据规划
IP address/IP 地址
Parameter
Description
参数名
参数解释
• Automatic: The system automatically configures the IP address, subnet mask, gateway IP address,
Ways to
and DNS.
obtain IP
自动获取IP地址：系统将自动配置IP地址、子网掩码、网关地址和DNS。
获取IP方式
• Manual: You need to manually set the IP address, subnet mask, gateway IP address, and DNS.
使用下面的IP地址：需要用户手动配置IP地址、子网掩码、网关地址和DNS。
• IP addresses starting with 127 are invalid. You must enter an IP address starting with another value
that ranges from 1 to 223.
IP address
以127开头的IP地址无效，请输入介于1和223之间的其它数值。
IP地址
• If the camera is passively registered with the platform using the ONVIF, GENETEC or SDK, only the IP
address needs to be configured.
通过ONVIF、GENETEC和SDK被动注册时，仅需要配置IP地址即可。
Active SDK registration/SDK 主动注册
Parameter
Description
参数名
参数解释
• Single-server mode: Select this mode when the camera needs to connect to only one video
surveillance platform.
Registration
单服务器模式：摄像机仅对接一个监控平台时选择。
type
• Dual-server mode: Select this mode when the camera needs to connect to two video surveillance
注册类型
platforms that are deployed in mutual backup mode.
双服务器模式：摄像机对接两个监控平台并且这两个监控平台为互备关系时选择。
Platform IP
IP address of the platform server. This parameter is mandatory.
平台IP
监控平台所在服务器的IP地址。必须设置。
Port number
Port number of the platform server. This patameter is mandatory.
端口号
监控平台所在服务器的端口号。必须设置。
• Unique camera ID.
设备ID，每台设备的ID唯一。
Device ID
• The value of this parameter must be the same as the device ID configured on the video surveillance
设备ID
platform. If they are different, the camera will fail to connect the video surveillance platform.
必须与平台配置的设备ID保持一致，以免造成对接失败。
GB/T 28181
Parameter
Description
参数名
参数解释
Platform IP
IP address of the platform server. This parameter is mandatory.
平台IP
监控平台所在服务器的IP地址。必须设置。
Port number
Port number of the platform server. This patameter is mandatory.
端口号
监控平台所在服务器的端口号。必须设置。
Unique ID that the video surveillance platform allocates to the camera.
must be the same as the first 20 digits in the device ID (the value of Code on the IVS platform)
Device ID
configured on the video surveillance platform. If they are different, the camera will fail to connect
设备ID
the video surveillance platform.
监控平台分配给前端设备的唯一标识。必须与平台配置的设备ID（在IVS平台中，该参数名为编码）的前20位保
持一致，以免造成对接失败。
User name used to register the camera with the video surveillance platform. The value of this
Login name
parameter is in the login name@domain name format. The login name indicates the device ID. The
登录名
domain name consists of 10 digits.
用于注册到监控平台。格式为：登录名@域名。登录名为设备ID，域名为自定义10位数字。
Password used to register the camera with the video surveillance platform. The value of this
Password
parameter must be the same as the registration password configured on the video surveillance
密码
platform.
设备注册到平台时的注册密码。必须和监控平台中的注册密码保持一致。
Server code
GB/T 28181 server code that consists of 20 self-defined digits.
服务器编码
GB/T 28181服务器编码。自定义输入20位数字。
Web Operations/Web 操作
Logging In to the Web Clinet/ 登录 Web 客户端
1
Open Internet Explorer, enter an IPC IP address,IP address can be set automatically via DHCP, or a static IP
address can be set manually (192.168.0.120 by default) and press Enter.
在Internet Explorer地址栏里输入摄像机的IP地址，IP地址默认通过DHCP自动获取，也可以手动进行设置（默认为
192.168.0.120），按"Enter"键。
• If a Dynamic Host Configuration Protocol (DHCP) server is configured for the current network and
the IPC automatically obtains its IP address from the DHCP server, the system will automatically set
the IP address.
当网络配备DHCP（Dynamic Host Configuration Protocol）服务器时，系统将自动配置IP地址。
• Supported browsers (on a 32-bit operating system): Internet Explorer 8, Mozilla Firefox 27, and
Google Chrome 32 or their later versions
支持的浏览器（32位）：Internet Explorer 8、Mozilla Firefox 27、Google Chrome 32及以上版本。
• To avoid security risks, change the password when logging in to the system as the admin user for
the first time.
首次使用admin用户登录时，请务必修改密码，以免造成安全隐患。
2
Enter the user name and password. The default user name and password are admin and HuaWei123
respectively.
输入用户名和密码。默认用户名为管理员用户"admin"，默认密码为"HuaWei123"。
3
Click Login.
单击"登录"。
Setting Basic Network Parameters/ 配置基本网络参数
1
Log in to the web client as the administrator.
以管理员用户登录 Web 客户端。
2
Choose Settings > Network Configuration > Network Parameters.
选择"配置 > 网络配置 > 基本网络参数"。
3
Set the network parameters as planned.
根据规划的数据配置基本网络参数。
For detail about how to set basic network parameters, see
基本网络参数的具体配置方式请参见《配置指南》。
Setting Platform Connection Parameters/ 配置平台对接参数
1
Log in to the web client as the administrator.
The value of this parameter
以管理员用户登录 Web 客户端。
2
Choose Settings > System Configuration > Platform Connection Parameters.
选择"配置 > 系统配置 > 平台对接参数"。
3
Set the platform connection parameters as planned.
根据规划的数据配置平台对接参数。
For detail about how to set platform connection parameters, see
平台对接参数的具体配置方式请参见《配置指南》。
The default coding protocol of IPCs is H.265. Verify that the connected surveillance platform supports
H.265. Otherwise, see the Configuration Guide to modify the coding protocol of IPCs.
摄像机出厂默认编码协议为H.265，请务必确认所对接的监控平台是否支持H.265编码协议，否则请参见《配置
指南》修改摄像机编码协议。
NOTE/ 说明
NOTE/ 说明
Configuration
Guide.
Configuration
Guide.
Advertisement
