3 Connect
Connect speakers
Note
•
Insert the stripped portion of each speaker wire into
the socket completely.
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
To insert each speaker wire: Hold down the
socket flap. Insert the speaker wire fully. Release
the socket flap.
1
For the right speaker, find the sockets on
the main unit marked 'RIGHT'.
2
Insert the red wire to the red (+) socket.
3
Insert the black wire into the black (-)
socket.
4
For the left speaker, find the sockets on the
main unit marked 'LEFT'.
5
Repeat steps 2-3.
10
EN
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the Micro Hi-Fi.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
1
Connect the AC power cord to the wall
socket.