Safety Instructions - Fichtelbahn OpenCar CarUpdater Manual

FichtelBahn
01. What is the CarUpdater?
Using this module all CarDecoder versions can be updated and being
brought to the most recent firmware version. The update module uses
the matching 4 pin interface to conduct an update of the decoder
without dismantling the vehicle.
Designated Use
The normal use of the CarUpdater is for model making especially digital
model railways according to this manual.
Every improper use leads to loss of warranty.
Package Contents
- CarUpdater Hardware
- USB cable
- Manual

02. Safety Instructions

To reduce the risk of electric shock and injuries do not touch parts that
carry voltage. Do not touch conductive material that might carry voltage
in case of a fault, e.g. short circuit, improper input voltage, excessive
humidity and accumulation of condensate.
To reduce these risks, keep these safety precautions in mind:
Use this module only indoors and in a clean and dry environment.
Avoid moisture and splash water in close proximity.
Switch off the voltage supply before carrying out wiring work. Only use
wire with sufficient cross-section. Wait for 2 hours after accumulation
of condensate.
Manual CarUpdater
Manual Version 2.1
page 7
© 2022 FichtelBahn
Technical changes and errors reserved