Page 1
Technology for Vacuum Systems ommuniCation USB VACUU·BUS converter ® for communication with VACUU·BUS -enabled devices ® Instructions for use Original instructions EN OI no.: 20901660...
Page 2
Service: +49 9342 808‑5660 Fax: +49 9342 808‑5555 Email: info@vacuubrand.com Web: www.vacuubrand.com Thank you for purchasing this product from VACUUBRAND GMBH + CO KG VACUUBRAND GMBH + CO KG. You have chosen a modern and technically high quality product. 20901660_EN_VACUU·BUS-CommunicationKit_V2.0_070920...
Introduction 1.4 Disposal Disposal NOTE NOTE Incorrect disposal of electronic components can cause environmental pollution. Used electronic devices contain harmful substances that can cause damage to the environment or human health. Disused electrical devices also contain valuable raw materials, which can be recovered for reuse if the device is disposed of correctly within the recycling process.
Product description Product description Product description The Communication Kit Communication Kit is a set consisting of various cable Intended use adapters intended for connecting VACUU·BUS components to a terminal device. The Communication Kit Communication Kit is used for communication between a Function terminal device, e.g., a PC, laptop, control panel, or PLC, and VACUU·BUS-enabled devices.
Product description Standard delivery In the package Communication Kit 20683230 Instructions for use 20901425 Original packaging ------ 2.2 Connection examples Connection examples 2.2.1 2.2.1 VACUU·PURE update VACUU·PURE update VACUU·PURE – firmware update Example VACUU·PURE update VACUU·PURE vacuum pump Communication Kit with cable adapter for VACUU·BUS socket/ D-sub Laptop or PC 20901660_EN_VACUU·BUS-CommunicationKit_V2.0_070920...
Product description 2.2.2 2.2.2 VACUU·BUS component update VACUU·BUS component update Vacuum sensor – firmware update Example Vacuum sensor update Description Plug-in power supply 24 V VACUU·VIEW vacuum sensor Communication Kit with cable adapter for VACUU·BUS connector/D-sub and Y adapter Laptop or PC Vacuum pump –...
Page 10
Product description Control module – control board firmware update Example VAC 24seven control module update Description VACUU·BUS extension cable, optional VAC 24seven control module Communication Kit with cable adapter for VACUU·BUS connector/D-sub Laptop or PC Pump module – single vacuum pump firmware update ...
Product description 2.2.3 2.2.3 VACUU·PURE data transfer VACUU·PURE data transfer VACUU·PURE communication Example Communication with a single vacuum pump Example Communication with multiple vacuum pumps Accessories for connecting multiple vacuum pumps, see “Ordering “Ordering information” on page 15 information”...
Connection Connection Connection 3.1 Cable adapters, general Cable adapters, general Connect cable adapters 1. Disconnect the device power plug or switch off the power switch. 2. 2. Connect all required components of the Communication Kit as shown in the illustrations in chapter 2.2. 3.
Connection 3.3 VACUU·BUS component VACUU·BUS component The unmarked cable adapter is intended for suitable VACUU·BUS components for updates and as a data transfer interface, e.g., for reading out values. Cable adapter with VACUU·BUS connector Example View of installed cable adapter Cable adapter for VACUU·BUS connector/D-sub RS-485 / USB-A adapter USB-A extension cable...
> Information about our complete product range is available in the current product catalog. > Your local distributor or VACUUBRAND GMBH + CO KG VACUUBRAND GMBH + CO KG sales office is available to assist you with orders, questions on vacuum control and optimal accessories.
Index Index Index Cable adapter ........7 Communication Kit ......7 Communication with a single vacuum pump ..........11 Communication with multiple vacuum pumps ..........11 Components ........7 Connect cable adapters ....13 Control module update ....10 Copyright ........... 5 Disposal ..........