Siemens OpenAir GEB 1E Series Quick Start Manual page 7

Outputs
Position indicator
Output signal (GEB16..1E)
Output signal (GEB36..1E)
Protected against faulty wiring
Aux. power supply (G-/G+)
Feedback potentiometer (for GEB142.1E)
Auxiliary switches (GEB146.1E, GEB166.1E, GEB346.1E)
Switching voltage
Contact loading
Electric strength auxiliary switch against housing
Switching range for auxiliary switches / setting
increments
Factory switch setting:
Connection cables
Cable length
Cross-section
Permissible length for signal wires
Safety class and degree of protection
Protection class
potentiometer
Degree of protection of housing
Environmental conditions
Operation
Transportation
Storage
Mechanical conditions
Siemens
Smart Infrastructure
Output voltage U
Max. output current
Change in resistance
Load
Max. contact current
Permissible voltage at potentiometer (SELV/PELV)
Insulation resistance between potentiometer and
housing
AC 24 V ~ / DC 24...48 V ⎓, feedback
AC 100...240 V ~, auxiliary switches
Climatic conditions
Mounting location
Temperature
Humidity, non-condensing
Climatic conditions
Temperature
Humidity, non-condensing
Climatic conditions
Temperature
Humidity, non-condensing
(wires 9-2/U-G0)
(wires 9-2/U-G-)
DC 0...10 V ⎓
DC ± 1 mA
Max. AC 24 V ~/ DC 24...48 V ⎓
GEB36.. DC 24 V ⎓ ± 20 %, max. 10 mA
(wires P1-P2) 0...5000 Ω
<0.25 W
<0.1 mA
AC 24 V ~ / DC 24...48 V ⎓
AC 500 V ~
AC 24...250 V ~ / DC 12...30 V ⎓
6 A resistive, 2 A inductive, min. 10 mA @ AC
4 A resistive, 2 A inductive, min. 10 mA @ DC 30 V ⎓
0.8 A resistive, 0.5 A inductive, min. 10 mA @ DC 60 V⎓
AC 4 kV
5°...90° / 5°
Switch A 5°
Switch B 85°
0.9 m
0.75 mm
2
300 m
EN 60730
III
II
IP54 as per EN 60529 (see "Mounting", page 4, and
Mounting instructions A6V11476940)
IEC 60721-3-3
Class 3K5
interior, weather-protected
-32...55 °C
<95 % r.h.
IEC 60721-3-2
Class 2K3
-32...70 °C
<95 % r.h.
IEC 60721-3-1
Class 1K3
-32...50 °C
<95 % r.h.
Class 2M2
7
A6V11449860_en--a
2019-09-10