3
Select the desired Wi-Fi network.
4
As prompted, enter the encryption key to
the network.
»
The unit starts to acquire an IP
address assigned by the Wi-Fi network
automatically.
A message appears when the
»
connection is completed successfully.
Enter key
Successfully
connected to
Network A
Note
•
The router may fail to assign an IP address,
if the DHCP (Dynamic Host Configuration
Protocol) is unavailable or disabled on the
router.
Wired connection
Connect to the router by using the Ethernet
cable
1
Select [Yes], when asked whether to set
up network connection (see 'First-time
setup' on page 18).
2
Use an Ethernet cable to connect the unit
to the router.
Connect to the home network
•
On the unit, select
The unit starts to acquire an IP address
»
assigned by the network automatically.
»
A message appears when the
connection is completed successfully.
MCi730
12V=1A
To Modem
LAN4
LAN3
LAN2
LAN1
Reset
[Wired (Ethernet)].
EN
21