Harman MIB GLOBAL ENTRY User Instructions page 33

Displays and functions in the PHONE
main menu
⇒Fig. 13
Displays and functions
Name of the cellphone provider, with
which the SIM card of the connected
1
cellphone is registered.
Name of the connected cellphone.
2

: Display of an active Bluetooth
connection.
: Charge state of the connected
3
cellphone.
: Signal strength of the currently received
cellular network station.
Take or reject a call
Fig. 14 Incoming call.
First read and observe the safety notes
on page 3 and the introductory information
on page 27.
An incoming phone call is displayed in the middle
of the screen by the phone number of the caller
⇒Fig. 14
.
2
If the phone number of the caller is saved in the
telephone directory, the name of the caller is
displayed.
During a phone call
Fig. 15 During a phone call.
28 Function description
⇒Fig. 13
Open call logs of the connected cellphone
⇒Page 30.
Open the telephone directory of the
connected cellphone ⇒Page 29.
The language selection mode is retrieved
⇒Page 29.
Couple and connect cellphone with radio.
®
When you take a call, the screen display is switching
to call mode ⇒Page 28.
Displays and functions
⇒Fig. 14
Display of incoming call.
1
Display of the phone number or saved
2
name.
Press the function key next to the display to
mute the ring tone during a call . Press the
function key again to cancel muting of the ring
tone.
Press the 
take a call.
Press the
reject a call.
First read and observe the safety
notes
introductory information on page 27.
During a phone call, the following
Displays and functions
Displays and functions
function key of the display to
function key of the display to
on page 3 and the