Teac PD-D2500 Owner's Manual page 8

Repeat Disc Play
Press the REPEAT button to select the
desired type of repeat disc play.
1. All of the tracks on the loaded discs
2. One track
3. All programmed tracks
a) Various tracks on several discs
b) All of the tracks on one disc
c) One track
∑ Repeat play: All of the tracks on
the loaded discs
1. Press the STOP ( ∑ ) button, then press
the CLEAR button.
O The PROGRAM indicator must be off.
2. Press the REPEAT button once.
The REPEAT ALL indicator lights.
3. Press the PLAY ( ∏ ) button.
The ∏ indicator lights.
O All of the loaded discs are played
repeatedly until the STOP ( ∑ ) button is
pressed.
∑ Repeat play: One track
1. Press the STOP ( ∑ ) button, then press
the CLEAR button.
O The PROGRAM indicator must be off.
2. Press the REPEAT button repeatedly
until "REPEAT ONE" is displayed.
3. Press a DISC NO.(1~5) button to select a
disc number.
4. Press the Ú or Æ button to select a
track number.
5. Press the PLAY ( ∏ ) button.
O The selected track is played repeatedly
until the STOP ( ∑ ) button is pressed.
Notes:
O The REPEAT function can be released by
pressing the REPEAT button until the
REPEAT indicators go off. If this is done
during playback, the player will continue
normal playback.
O When the last track on disc number 5
has finished playing ( during normal
play), the CD changer will stop.
∑ Repeat play: All programmed
tracks
1. Press the STOP ( ∑ ) button, then press
the CLEAR button.
O The PROGRAM indicator must be off.
2. Enter one of the following types of
programs ( see "Program and Program
Play"). The PROGRAM indicator lights.
a) Various tracks on several discs
b) All of the tracks on one disc
c) One track (1 disc number and 1 track
number)
3. Press the REPEAT button once.
The REPEAT ALL indicator lights.
4. Press the PLAY ( ∏ ) button.
O All of the programmed tracks are played
repeatedly, in order, until the STOP ( ∑ )
button is pressed.
∑ Repeat play: One programmed
track
1. Press the STOP ( ∑ ) button, then press
the CLEAR button.
O The PROGRAM indicator must be off.
2. Enter one of the following types of
programs ( see "Program and Program
Play"). The PROGRAM indicator lights.
a) Various tracks on several discs
b) All of the tracks on one disc
3. Press the REPEAT button twice.
The REPEAT ONE indicator lights.
4. Press the PLAY ( ∏ ) button.
5. Press the Ú or Æ button to select
the programmed disc and track to be
repeated.
O The programmed track selected will
play repeatedly until the STOP ( ∑ )
button is pressed.
O If a disc is selected which has been
programmed to play "ALL" selections,
only track 1 will play repeatedly until the
STOP ( ∑ ) button is pressed.
Note:
O The PROGRAM REPEAT function can be
released by pressing the REPEAT button
until the REPEAT indicators go off.
Programmed play continues from that
point.
– 8 –
Basic Operation Shuffle Play
1. Press the SHUFFLE button.
The SHUFFLE indicator lights.
2. Press the PLAY ( ∏ ) button.
The ∏ indicator lights and shuffle play
begins.
O The CD changer's built-in micro-
computer will select and play disc
tracks at random.
O If tracks have been programmed, the
programmed tracks will be played at
random.
O When all of the shuffle programmed
tracks have been played, the CD
changer will stop.
O Pressing the Ú or Æ button during
the shuffle programmed play changes
track numbers in the programmed order.
O If a new track number or disc number is
selected during normal shuffle play, and
the PLAY ( ∏ ) button is pressed, the CD
changer will play the new track and
shuffle play will continue.
O If a new track number is selected during
the shuffle play of programmed tracks,
and the PLAY ( ∏ ) button is pressed, the
new track number will be ignored, and
shuffle play will continue.
3. Press the SHUFFLE button again to
release this mode.
O When the SHUFFLE button is pressed,
shuffle play will end and normal ( or
programmed) disc play will continue
from that point.
4. Press the STOP ( ∑ ) button to end
shuffle play.