Troubleshooting
Problem
The contents of the USB fl ash drive
cannot be read
Slow operation of the USB fl ash
drive
No HDMI video output
No HDMI audio output
52
1_dvp5980MKll_12_eng 2.indd 52
1_dvp5980MKll_12_eng 2.indd 52
(continued)
– The USB fl ash drive format is not compatible with the
DVD player.
– Drive is formatted with a different fi le system. (e.g.
NTFS)
– Big fi le size or high solution USB fl ash driver takes longer
time to read and display on the TV screen.
– HDMI connection can only be made to HDMI-equipped
devices with HDCP (High Bandwidth Digital Content
Protection). Use a separate adaptor (DVI to HDMI) for
DVI TV connection (equipped with HDCP).
– Make sure the resolution of this DVD player matches the
TV device you have connected using the HDMI;
480p/576p/720p/1080i/1080p and this DVD player
supports 1080p at 50/60Hz only.
– When connecting to a non-HDCP complaint TV, the
HDCP warning message will appear.
– When the HDMI and RGB video connection are used at
the same time, there will be no picture output from the
RGB video connection, disconnect the HDMI cable.
– Press HD UPSCALE if no picture on the TV screen after
power off and on.
– Check the connection between the TV and HDMI of
DVD player.
– During resolution selection for DVI TV, a distorted or
black screen may appear, see HDMI Video Setup.
– There will be no sound from the HDMI output if the
source device is only DVI/HDCP (High Bandwidth Digital
Content Protection)- compatible.
– It is not possible to output SACD or copy-controlled
DVD audio sources from the HDMI connection.
Solution
2007-08-22 10:55:51 AM
2007-08-22 10:55:51 AM