DVD Menu Options
D
Press
to highlight one of the
following options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Choose zero (0) to
balance the contrast.
SHARPNESS
Increase the value to enhance the
sharpness in your picture or vice versa.
Choose zero (0) for average setting.
COLOR
Increase the value to enhance the colour
in your picture or vice versa. Choose
zero (0) to balance the colour.
E
Press
to adjust the setting that best
suits your personal preference.
F
D~E
Repeat steps
color features.
G
Press OK to confi rm.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
42
1_dvp5980MKll_12_eng 2.indd 42
1_dvp5980MKll_12_eng 2.indd 42
(continued)
A
B
for adjusting other
Component
This setting allows you to toggle the
output of the video signal between RGB
(on scart) and Interlaced YPbPr.
In 'Video Setup Page', press
select { Component }, then press
{ Interlaced }
Select this for Interlaced YPbPr
connection.
{ RGB }
Select this for scart connection.
Use
to select a setting and press
OK to confi rm.
Warning:
When the DVD player is set to
YPbPr, some TV may not properly
synchronise with the player on the
SCART connector.
to
.
2007-08-22 10:55:47 AM
2007-08-22 10:55:47 AM