HP B2600 Disassembly Procedure page 2

HP B2600 Workstation Disassembly
1 Product End-of-Life Disassembly Instructions
This document describes the disassembly of an HP workstation for the removal of Annex-2 components.
1.1 Product Identification
The procedures in this document apply to the workstation identified in Table 1-1.
Table 1-1 Product ID
Marketing Name / Model
HP B2600 Workstation
1.2 Purpose
This document is for end-of-life recyclers or treatment facilities. It provides basic instructions for
disassembling an HP workstation to remove components and materials that require selective treatment.
1.3 Removal Items
Table 1-2 lists the items to be removed.
Table 1-2 Removal Items
Item Description
Printed Circuit Boards (PCB) or Printed
Circuit Assemblies (PCA) with a
surface greater than 10 square cm
Batteries
Components containing mercury
Liquid Crystal Displays (LCD) with a
surface greater than 100 square cm
Workstation
Notes
All types including standard
alkaline and lithium coin or button
style batteries
Examples: mercury in lamps,
display backlights, scanner
lamps, switches, batteries
Includes background illuminated
displays with gas discharge lamps
Page 2
November 2005
Description
Quantity of Items
in Workstation
Four―two in the
power supply, one
graphics card, and
one system board.
(Additional cards may
be present depending
on the configuration.)
One
None
None