Table of Contents
Advertisement
TV
Audio
(red/white cables)
DVD player (rear)
HDMI OUT
Step 1: Connecting to
television
This connection enables you to view the
video playback from this unit. You only
need to choose one of the options below
to make the video connection.
– For a Scart TV, follow option 1.
– For a progressive scan TV, follow
option 2.
– For a HDMI TV, follow option 3.
Option 1: Using Composite Video
jacks (CVBS)
You can connect this unit to a TV
through the composite video cable which
provides good picture quality.
Connect the audio/video cables (supplied)
from the TV OUT and AUDIO OUT
L/R jacks on this unit to the video input
jack (yellow) and audio input jacks (red/
white) on your TV.
dvp3980_75_eng4_final809.indd 11
dvp3980_75_eng4_final809.indd 11
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
Video
(yellow)
DIGITAL
TV OUT
Pb
OUT
Y
Pr
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
Basic Connections
COMPONENT
VIDEO IN
TV
1
Video
TV OUT
Pb
Y
Pr
HDMI OUT
COMPONENT VIDEO OUT
Option 2: Using Component Video
sockets (Y Pb Pr)
You can connect this unit to a TV
through the component video cables
which provides superior picture quality.
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required.
A
Connect the component video cables
(red/blue/green - not supplied) from the
Y Pb Pr sockets on this unit to the
corresponding component video input
sockets (or labeled as Y Pb/Cb Pr/Cr or
YUV) on your TV. Leave the yellow video
plug disconnected.
B
Connect the audio/video cable (red/white
- not supplied) from the AUDIO OUT
L/R sockets on this unit to the audio
input sockets (red/white) on your TV.
C
Proceed to 'Getting Started - Setting up
Progressive Scan feature' for detailed
progressive feature setup.
S-VIDEO
IN
AUDIO
IN
VIDEO IN
2
Audio
(red/white cables)
DIGITAL
OUT
COAXIAL
AUDIO OUT
11
2008-02-27 10:39:45 AM
2008-02-27 10:39:45 AM
Advertisement
Table of Contents
