Table of Contents
Advertisement
MAINTENANCE
NANCE
Cleaning and Care
NCE
Cleaning & Maintenance
Empty the water container
and Care
MAINTENANCE
1. Pull out and hold the water container
ater container
with two hands.
Care
d the water container
2. Tilt the water container, pour out the
CLEANING AND CARE
.
condensate water into the basin.
container
Cleaning and Care
EMPTYING THE WATER CONTAINER
ontainer, pour out the
3. Install the water container.
water container
ter into the basin.
Empty the water container
r container.
er, pour out the
1. Pull out and hold the water container
o the basin.
with two hands.
Warning!
！ ！
ainer.
2. Tilt the water container, pour out the
condensate water into the basin.
Pull out the water
• Empty the water container after each use. Once the water container is filled
g!
3. Install the water container.
container and keep
completely, the programme will be paused and the " " icon will light. After
level with two hands.
ter container after each use. Once the water container is filled
the container is emptied, the dryer can be restarted by pressing
e programme will be paused and the " " icon will light. After
【Start/Pause】button.
is emptied, the dryer can be restarted by pressing
• Do not drink the condensate water.
WARNING!
tainer after each use. Once the water container is filled
Empty the water container after each use. Once the water container is filled completely, the program
Warning!
】button.
• Do not use the dryer without the water container.
！ ！
will be paused and the "
ramme will be paused and the " " icon will light. After
he condensate water.
pressing Start/Pause button.
tied, the dryer can be restarted by pressing
. Once the water container is filled
• Empty the water container after each use. Once the water container is filled
e dryer without the water container.
•
Do not drink the condensate water.
Clean the filters
on.
d and the " " icon will light. After
completely, the programme will be paused and the " " icon will light. After
•
Do not use the dryer without the water container.
densate water.
restarted by pressing
the container is emptied, the dryer can be restarted by pressing
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
ers
without the water container.
【Start/Pause】button.
for additional protection. Make sure you clean the door filter after each cycle.
CLEANING THE FILTERS
• Do not drink the condensate water.
imary door lint filter and a base filter in front of the heat exchanger
The base filter need to be cleaned after each fifth drying programme.
This dryer has a primary door lint filter and a base filter in front of the heat exchanger for additional
ntainer.
• Do not use the dryer without the water container.
tection. Make sure you clean the door filter after each cycle.
protection. Make sure you clean the door filter after each cycle. The base filter need to be cleaned after
Clean the
door
each fifth drying program.
ed to be cleaned after each fifth drying programme.
door lint filter and a base filter in front of the heat exchanger
Clean the filters
1. Open the door.
CLEANING THE DOOR FILTER
n. Make sure you clean the door filter after each cycle.
r
filter
2. Take out the
door
1.
Open the door.
base filter in front of the heat exchanger
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
e cleaned after each fifth drying programme.
2. Take out the door filter.
3. Open the filter and remove the fluff on
n the door filter after each cycle.
for additional protection. Make sure you clean the door filter after each cycle.
3. Open the filter and remove the fluff on the filter.
or
filter.
the filter, You can clean it in
er
You can use running water to help clean it.
fifth drying programme.
The base filter need to be cleaned after each fifth drying programme.
and remove the fluff on
4. Dry the
door
filter thoroughly before
4. Dry the filter door thoroughly before reinstalling it.
an clean it in
running
water.
installing it back.
Clean the
air circulation. Not cleaning the filter
r.
Note: Take notice of the correct orientation
er thoroughly before
onsumption.
move the fluff on
of the filter before inserting it back.
1. Open the door.
k.
Note!
n it in
running
water.
2. Take out the
Door Filter
WARNING!
roughly before
3. Open the filter and remove the fluff on
• Take notice of the correct orientation
•
The fluff accumulated on the filter will block the air
the filter, You can clean it in
before to insert the door filter.
circulation. Not cleaning the filter regularly will increase
the correct orientation
drying time and energy consumption.
4. Dry the
door
•
Disconnect the power cord before cleaning!
t the door filter.
installing it back.
•
Do not operate the dryer without the filter!
with your hand,
rect orientation
Note!
CLEANING THE HEAT EXCHANGER
oor filter.
WARNING! Do not touch the heat exchanger with your hand as it may cause injury.
• Take notice of the correct orientation
move the fluff from the heat
As necessary, approx. once every 6 months, remove the fluff from the heat exchanger using a vacuum
before to insert the door filter.
ting brush attached.
cleaner with a dusting brush attached. Clean the heat exchanger without applying any pressure. Otherwise
ny pressure. Otherwise the heat
the heat exchanger could be damaged. The dryer will not dry if the cooling fins are damaged or bent.
ot dry
21
Tilt the water container
to pour out condensate
into the basin.
" icon will light. After the container is emptied, the dryer can be restarted by
filter
filter.
running
water.
door
filter
Door Filter
door
filter.
running
filter thoroughly before
21
Reinstall the water
container once
Removing the
door filter.
Door Filter
water.
21
21
13
empty.
Door Filter
Door Filter
Advertisement
Table of Contents
