Table of Contents
Advertisement
Hiding an unwanted chapter
You can choose to hide certain scene
from playback (e.g. skipping a commercial
scene) or make it visible again.
Create a chapter marker at the scene
A
you are going to hide. ( See previous page
on "Insert Chapter Marker").
Select the chapter you want to hide and
B
start playback. ( See previous page on
"Selecting a chapter").
During playback, press EDIT to display
C
the video editing menu, then use
keys to select
and press OK.
The current chapter will be hidden.
l
If the video editing menu does not show,
press EDIT on the remote control.
To unhide a chapter
Press EDIT on the remote control
A
during playback.
The video editing menu appears.
While in editing mode, the hide
chapter will play.
BUse keys to select { Unhide
Chapter } and press OK.
The current chapter will be visible
during playback.
Helpful Hint:
– All the hidden chapters will be played
back while in video editing mode.
TIPS:
No further recording and editing can be carried out on a finalized DVD±R/DVD-RW/DVD+R DL.
Press to go back to the previous menu.
Editing/Finalizing Recording
{ Hide Chapter }
Changing Index Picture
The index picture is the picture of the
title you will see when the DVD recorder
loads up the Index menu. Normally, the
first frame of a recording is shown as the
title's index picture.
l
Press EDIT to display the video editing
menu, then use keys to select
{ Index Picture } and press OK
to select the current scene as the index
picture for the title.
Splitting a title (DVD±RW only)
You can divide the current title into two
new titles. Each of these titles is
characterized by its own index picture.
Warning! Once a title is divided, it
cannot be reversed.
l
During playback, press EDIT to display
the video editing menu, then use
keys to select
press OK to divide the title at the
current playback position.
A new title will be shown at the Index
Picture screen.
(continued)
{ Split Title } and
39
Advertisement
Chapters
Table of Contents
