Getting Started
Modifying Channel Information
You can set a TV channel to your
preference and improve the reception
and the sound quality of the TV channel.
Press SYSTEM-SETUP
A
The system menu appears.
Use keys to highlight
B
{ System Setup - Channel Setup } and
press OK.
Use keys to highlight { Modify
C
Channel Information } and press OK.
The channel menu appears.
Use keys to select one of the
D
options and press OK.
{ Name }
You can use the numeric keypad 0-9
to select the channel preset number
which you wish to change.
– Use keys to change alphabet/
number and use keys to select
different entry fields, then press OK to
confirm.
{ Scan Mode }
Select TV channel search mode based on
channel allocation or frequency.
– Use keys to select { Channel },
{ S-Channel } (Special Channel) or
{ Frequency }, then press OK to confirm.
{ Frequency }
Shows the frequency of the current TV
channel.
TIPS:
Press to go back to previous menu item.
Press SYSTEM-SETUP to exit the menu.
4
(continued)
E
TIPS:
– If required, use keys to start the
automatic frequency search or press
STOP stop search.
{ Sound mode }
Set the TV system that produces the
least distortion of picture and sound.
– Use keys to select a suitable sound
mode, then press OK to confirm.
(See chapter "TV System Guide" at the
back of this manual for more information).
{ Skip }
Select this to set the channel to be
skipped.
The skipped channels can only be
accessed by pressing the corresponding
number button on the remote control.
– Use keys to choose { Yes } if you
wish to skip this channel, then press OK
to confirm.
{ Fine Tune }
Select this to fine-tune the TV channel
manually if the reception is poor.
– Use keys to adjust the frequency.
Once complete, select
menu and press OK to confirm and exit
to the previous menu page.
If you do not wish to save any
changes, select
By default, PAL D/K is TV System for most parts of China.
Change to PAL I if you are sure your area support PAL I.
in the
and press OK.