Connecting To A Vcr And Cable Box/Satellite Receiver - Philips DVDR3408/93 User Manual

Antenna/cable
TV signals
Connecting to a VCR and
Cable Box/Satellite Receiver
Connect the Antenna/Cable TV signal to
A
the antenna input (RF IN) jack on the
VCR.
Connect the antenna output (RF OUT)
B
jack on the VCR to the input(RF in) jack
on the Cable Box/Satellite Receiver.Then
connect the RF out on the Cable Box/
Satellite receiver to the ANTENNA IN
jack on the DVD recorder.
Use the supplied RF coaxial cable to
C
connect the ANTENNA OUT jack on
the DVD recorder to the antenna input
jack on the TV .
Use the audio/video cables to connect
D
the VIDEO/AUDIO IN-EXT on the
DVD recorder to the matching VIDEO/
AUDIO output jacks on the VCR.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Optional Connections
VHF/UHF
晻
RF IN
VIDEO
OUT
A
AUDIO
L
VHF/UHF AUDIO
R
RF OUT
B
IN
VIDEO AUDIO
RF
R
C
晻
VIDEO
IN
AUDIO
L
AUDIO
R
Back of a Cable Box or
OUT
Satellite Receiver
S-VIDEO
L
D
(Example only)
E
TV
AU D IO S-V ID E O IN
O U T
V ID E O IN
Use the audio/video cables to connect the
E
VIDEO/AUDIO OUT on the DVD
recorder to the matching VIDEO/AUDIO
input jacks on the TV.
Helpful Hints:
– You may use the S-VIDEO (Y/C) jack
instead of VIDEO (CVBS) jack if the
connected device has the same S-VIDEO
input/output jack. This video connection
provides better picture quality.
(continued)
Back of a VCR
(Example only)
15