Table of Contents
Advertisement
Step 1: Basic Recorder Connections
Connecting the video cable
This connection enables you to view the
disc playback from the recorder.
You only need to choose one of the
options below to make your video
connection.
Option 1: Using Video (CVBS) jack
(good picture quality)
Use the supplied video cable (yellow
l
plug) to connect the VIDEO OUT
[CVBS] jack on the recorder to the
VIDEO Input jack (or labeled as A/V In,
Video In or Composite) on the TV.
Option 2: Using S-Video jack
(excellent picture quality)
Use an S-video cable (not supplied) to
l
connect the VIDEO OUT [S-VIDEO]
jack on the recorder to the S-VIDEO
Input jack (or labeled as Y/C or S-VHS)
on the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
OR
Option 3
Option 3 : Using Component Video
jack (best picture quality)
A
Use the component video cable (red/
blue/green - not supplied) to connect the
VIDEO OUT [Y P
recorder to the corresponding
component VIDEO Input jacks (or
labeled as Y Pb/Cb Pr/Cr or YUV) on the
TV.
B
If your TV accepts Progressive Scan
signal, see page 63 for detailed
Progressive Scan set up.
IMPORTANT!
The progressive scan video quality is
only available through a YP
connection and a progressive TV is
required. It is strongly advised to
complete the recorder installation
first, before enabling the progressive
scan feature.
(continued)
OR
Option 2
Option 1
P
] jacks on the
B
R
P
B
R
17
Advertisement
Table of Contents
