Table of Contents
Advertisement
No sound from TV programme.
•
Connect an audio cable from the AUDIO
input on this Home Theatre System
to the AUDIO output on your TV.
Then press
repeatedly to select the
corresponding audio input source.
No surround sound effect from the speakers.
•
Press
to select a correct
surround sound setting.
•
If the Home Theatre System does not
support DTS playback, press
select other audio track.
•
Ensure that the source you are playing
is recorded or broadcast in surround
sound (Dolby Digital, etc).Sound cannot
transmit through HDMI connection if
the connected device is non-HDCP
compliant or only DVI-compatible. Make
an analogue or digital audio connection.
Play
DivX video fi les cannot be played.
•
Ensure that the DivX fi le is encoded
according to the 'Home Theatre Profi le'
with the DivX encoder.
•
Ensure that the DivX video fi le is
complete.
The aspect ratio of the screen is not aligned
with the TV display setting.
•
The aspect ratio is fi xed on the disc.
DivX subtitle does not display correctly.
•
Ensure that the subtitle fi le name is the
same as the movie fi le name.
•
Select the correct character set:
1) Press
-
.
2) Select [Preferences] , then press .
3) Select [DivX Subtitle] , then press OK .
4) Select the character set that supports
the subtitle.
The contents of the USB fl ash drive cannot
be read.
•
The USB fl ash drive format is not
compatible with this Home Theatre
System.
•
Drive is formatted with different fi le
system which is not supported by this
unit (e.g. NTFS).
•
Maximum size of memory supported is
160 GB.
to
No sound from the rear speakers and the
indicator on the wireless receiver blinks
continuously for more than one minute.
•
Ensure that all required connections are
connected and carry out the following
steps:
1) Press .
2) Press
3) Press 1 , then press the
button within 5 seconds. 'PAIRING
SUCCESS' is displayed.
4) If 'PAIRING FAIL' is displayed, repeat
steps 1 to 3.
-
. A screen is displayed.
EN
49
Advertisement
Table of Contents
