Table of Contents
Advertisement
Map the audio inputs to the
connected devices
Note
•
Before you start, ensure that the audio output
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theatre System.
General Setup
EasyLink Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep Timer
DivX(R) VOD Code
1
Press
.
2
Press
-
.
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup] , then press .
•
[One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
Once complete, audio input mapping
»
menu is displayed.
Audio Input Mapping
Aux 1
Aux 2
Coaxial In
Optical In
EasyLink
One Touch Play
One Touch Standby
System Audio Control
Audio Input Mapping
[TV]
[DVD 3400]
other (Non-HDMI)
For example, if the TV audio is
connected to the AUX1 jack on this
Home Theatre System, select [Aux1]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theatre System that is used to connect to
other HDMI devices (e.g. AUX1, AUX2),
then press .
7
Select the correct connected device, then
press OK .
Repeat steps 5–7 to map other
»
connected devices.
8
Press
-
to exit the menu.
EN
23
Advertisement
Table of Contents
