Table of Contents
Advertisement
Problem description
Why is there no sound during the
CD playback?
Why is it that Win 98SE and Win
ME sometimes cannot auto detect
the USB audio device?
USB 5.1 vibration
Troubleshooting
Proposed solution
The CD audio is probably set to analog instead of
digital audio. The USB audio signal is digital,
therefore the input signal has to be digital as well.
Open the " Device Manager ", select " DVD/CD
ROM Drives " and open it.
Then open the " Properties " page and enable
" Digital CD Audio" .
Win 98SE and Win ME have different driver
architecture than Win 2000 and Win XP. When users
plug in/out the USB audio device too fast, Win 98SE
and ME may not detect the device change. In this
case you will have to switch the audio device to
" USB audio device " by yourself.
Open the " Control Panel ", select " Sounds and
headset
Advertisement
Table of Contents
