Table of Contents
Advertisement
1
Notice
Compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/
EC (EMC).
Mains fuse (UK only)
This product is fitted with an approved moulded
plug. Should it become necessary to replace the
mains fuse, this must be replaced with a fuse of
the same value as indicated on the plug (example
10A).
1
Remove fuse cover and fuse.
2
The replacement fuse must comply with BS
1362 and have the ASTA approval mark. If
the fuse is lost, contact your dealer in order
to verify the correct type.
3
Refit the fuse cover.
Note
•
To conform with the EMC directive
(2004/108/EC), the mains plug on this product
must not be detached from the mains cord.
EN
2
Trademarks
Manufactured under license under U.S. Patent
#'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks & DTS Digital Surround
and the DTS logos are trademarks of DTS, Inc.
Product includes software.
Reserved.
Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
DTS, Inc. All Rights
©
Advertisement
Table of Contents
