Apply Factory Settings; Wall Mount Your Soundbar - Philips HTS3121/12 User Manual

Apply factory settings

You can reset your SoundBar to the default
settings programmed at the factory.
In AUX mode, press TREBLE+, VOL-, and BASS+
within three seconds.
» When the restore factory settings
process is complete, the standby
indicator blinks five times. Your SoundBar
automatically switches off and back on
again.
6 Wall mount your
SoundBar
For detailed steps about how to wall mount your
SoundBar, refer to Quick start guide.
Note
•
You can remove the three rubber feet at the
bottom of the SoundBar before wall mount.
•
If the rubber feet are removed, you cannot
place them back again at the bottom of the
SoundBar.
EN
9