Table of Contents
Advertisement
Updating software automatically (For Service use
only)
You can view information on the current
version of the TV software and install new
versions if they are available.
Viewing the current software
version
1.
Press the
control and use the Î or ï button to
select Digital TV from the source list.
2.
Press the
setup menu.
ï button until Information is
3.
Press the
highlighted, then press the Æ button to
select it.
The software version is displayed.
Installing new software
1.
Switch off the TV set from the wall
socket mains. Insert your USB device to
the USB port at the rear panel of the TV
set and switch on the set.
2.
If you are in analog mode, switch to digital
mode by pressing the v button on the
remote control.
3.
Press the
setup menu.
4.
Press the
ï button until Information is
highlighted, then press the Æ button to
select it.
5.
Press the
u button to enter the System
Software menu. Press the Æ button
followed by the ï button to highlight
New Software.
6.
Press the
u button to select New
Software.
button on the remote
button to display the
button to display the
Setup | Information
Information
System Software
Enter to view current software version.
System Information
H/W Version: ZDT620 ISDTV V0.1
S/W Version: LC07B-DTM V0.13+
Release Time: Aug-27-2007 02:10PM
Note: Screen information may differ
depending on your software version.
Setup | Information
Information
System Software
Setup | Information | New Software
New Software
Select USB disk
Select USB disk to read file.
25
System Software
Current Software Version
New Software
Restore Default
Close
System Software
Current Software Version
New Software
Restore Default
Close
Select USB disk
USB disk1
Close
Advertisement
Table of Contents
