Edision HD Modulator 3in1 Quad User Manual page 10

To save the selected configuration press once the MENU/OK key and confirm with YES or NO
by pressing the LEFT and RIGHT keys and press MENU/OK key once again. The configuration
is being saved, please DO NOT power off the unit! This procedure must be made separately, in
each one of the 4 MODULATOR displays (MOD1, MOD2, MOD3, MOD4).
10
CH: Shows the selected RF output
chan nel in the DVB-T or ISDB-T
terrestrial sig nal modulation
selection. Use the "Up", "Down"
keys to change the selection
FR:Shows the selected RF
output fre quency on the DVB-C
modulation cable signal. With the
«Up», «Down» keys you change
the selection.
QAM: Shows the QAM in the
DVB-C modulation. Use the
"Up", "Down" keys to change
the 16QAM, 32QAM, 64QAM,
128QAM or 256QAM selection.
ID: Shows the current ID. Use
the keys Up & Down to set the
desired ID.
RF: Shows the RF output level.
Use the keys Up & Down to
adjust to the desired RF level.
LCN: Shows the current LCN type.
Use the keys Up & Down to set
the desired LCN type.
FACT: Factory defaults. Press
key UP to restore factory defaults.
CFG: Configuration file extraction.
Press key UP to extract the
current configuration to the USB
storage device.
SOFT: Shows the SW version.
Use the key Up & Down to
display the current SW version.
STAN: Shows the TV STANDARD
mod ulation signals. Use the
"Up", "Down" keys to change
the DVB-T, DVB-C, or ISDB-T
selection.