Sound Issues; Hdmi Connection Issues - Philips 47PFL7404H/12 Manual

There is poor TV reception from an antenna
connection:
• Check that the antenna is properly
connected to the TV.
• Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
•
If reception on only one channel is poor,
fine tune this channel.
There is poor picture quality from connected
devices:
•
Check that the devices are connected
properly.
• Check that the picture settings are
correctly set.
The TV did not save your picture settings:
• Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
•
Try using a different picture format.
The picture position is incorrect:
•
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
The picture from broadcasts is scrambled:
• You may need to use a Conditional
Access Module to access content. Check
with your operator.
An "e-sticker" banner displaying information
appears on the TV display:
• The TV is in [Shop] mode. Remove the
e-sticker by setting the TV to [Home]
mode. In the [Home] menu, select
[Setup] > [Installation] > [Preferences]
> [Location] menu. It is necessary to
switch the TV to standby to ensure that
the TV exits [Shop] mode completely.
EN
48

Sound issues

There is a picture but sound quality is poor:
Note
•
If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
• Check that all cables are properly
connected.
•
Check that the volume is not set to 0.
•
Check that the sound is not muted.
•
Check that the TV speakers setting is on
in the sound menu.
•
Check that the TV audio output is
connected to the audio input on the
HDMI CEC enabled/EasyLink-compliant
HTS device. Sound should be heard from
the HTS speakers.
There is a picture but the sound quality is
poor:
•
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the
centre.

HDMI connection issues

There are problems with HDMI devices:
• Note that HDCP support can delay the
time taken for a TV to display content
from a HDMI device.
•
If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
• If a HDMI-to-DVI adaptor or HDMI to
DVI cable is used, check that an additional
audio cable is connected to AUDIO L/R
or AUDIO IN (mini-jack only).