GMC Yukon 2023 Owner's Manual page 258

Hide thumbs Also See for Yukon 2023:
Table of Contents

Advertisement

Hitch Guidance
Surround Vision (360 Degrees)
If equipped, the Surround Vision system can
display various views surrounding the
vehicle in the infotainment display using
four cameras mounted around the vehicle.
The front camera is in the grille under the
front emblem, the side cameras are on the
bottom of the outside mirrors, and the rear
camera is in the tailgate handle.
The Surround Vision system can be accessed
by selecting CAMERA in the infotainment
display or when the vehicle is shifted into
R (Reverse). To return to the previous screen
sooner, when not in R (Reverse), press the
Home or Back button on the infotainment
system, shift into P (Park), or, while in D
(Drive), reach a vehicle speed of
approximately 12 km/h (8 mph).
Available camera views:
Front/Rear Standard View
Front/Rear Top-Down View
Front/Rear Side View
Hitch View
Surround View
Guidance Lines
Hitch Guidance
Troubleshooting
The Transparent Trailer calibration may take
longer than expected or not calibrate if:
The vehicle is driven too fast during
calibration. Speed should be maintained
below 50 km/h (31 mph).
The vehicle is not driven straight during
calibration. Steering should be maintained
as straight as possible, excessive steering
during calibration may extend
calibration time.
The calibration is attempted in low light.
Calibration should be attempted when
there is enough light.
The calibration is attempted during
adverse weather conditions. Calibration
during conditions such as snow or heavy
rain should be avoided.
The road surface is not ideal for
calibration. Calibration should be
attempted on an alternate road surface.
The accessory trailer cameras are
swapped at the hitch connector. Ensure
that the camera mounted to the rear of
the trailer is connected to the rear trailer
camera input.
Driving and Operating
The accessory trailer camera is mounted,
angled or rotated outside of the defined
mounting location (see camera
installation instructions).
Distortion may be observed in the calibrated
Transparent Trailer View if:
The accessory trailer camera is mounted,
angled or rotated outside of the defined
mounting location (see camera
installation instructions).
The Transparent Trailer icon may appear
grayed out if:
A compatible trailer profile is not
configured or a non-compatible trailer
profile is selected.
The vehicle is in R (Reverse).
The trailer is not connected.
The accessory rear trailer camera is not
connected or connected to the incorrect
input.
The preview may not be provided or the
wrong preview may be provided if:
The accessory cameras are not recognized.
Ensure that the accessory camera(s) are
connected and power cycle the vehicle.
257

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yukon xl 2023Denali 2023

Table of Contents