2.3
Information of Connected UbiQ
Click one item of Connected Ubiq Platform, and the information of the UbiQ device
will be shown on the window:
"Device Name" field can be edited for the name of UbiQ device.
"DHCP Enablde" checkbox is switch on/off for DCHCP server exist or not on the
LAN. If "DHCP Enabled" is set to off, then the items of IP parameters can be
edited by users.
"Set" button : notify the modified messages to UbiQ device.
"Get Time" button : get the current time of UbiQ device.
"Set Local Time" button : set the host PC time to UbiQ device.
"H/W Rest" button : launch the H/W reset command to UbiQ device.
"Get MacID" button : get the MacID address of UbiQ device.
"Set MacID" button : set the MacID address to UbiQ device.
"Bitmap Filename" field : specify the boot logo bitmap filename.
"Set Logo" button : set the boot logo bitmap to UbiQ device.
11
UbiQ Scenario Manager User Manual